• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    Fuel Sending Unit Access Panel

    I have some extra panels if needed.
  2. 86humv

    M1165 issues

    Run a thread brush [ tap } into holes with a little oil.
  3. 86humv

    200Amp generator vibration

    A stiffener from rear of Alt. to lower Eng. block might be loose.
  4. 86humv

    Rivet Information

    FSI has a different model that the military got after the early leaking ones. D-180 is a better unit.
  5. 86humv

    Rivet Information

    Hmmwv also has solid rivets...shot in with a rivet gun, with proper rivet set, and a bucking bar....best to just use Cherry blind rivets,.
  6. 86humv

    x-door body reinforcements needed?

    Those are only for heavy armor doors...X doors dont use those.
  7. 86humv

    HMMWV 4L80E Reman Transmission

    91-96 4L80e...had cooling issues, so they updated design 97 and above. 91-96 has cooling in and out next to each other like the 400 turbo trans...97+ separated cooling connections and different pan.
  8. 86humv

    Humvee Thermostat Housing Problem

    I might have one to sell
  9. 86humv

    out drive Helical cut gears vs straight cut

    Stub shafts have all the same splines....the stub shafts in pic : Left one is for solid 12k rotors....Right is 7, 10, 12k vented rotors.
  10. 86humv

    Airlift Bumper question

    There are early and late Rhino stowage brackets...early had round bolt holes...late had slotted holes which alow the Rhino to sit higher once stowed.
  11. 86humv

    Electric turret controller cable part number help

    No...hard to find.
  12. 86humv

    Electric turret controller cable part number help

    I have 2 ea. Joy stick wires...one has jb weld on connector. $ 100 for repaired one. $150 for other one. . Plus shipping
  13. 86humv

    Electric turret controller cable part number help

    I'll check
  14. 86humv

    OGPK rough dimensions?

    I've had them copied and had repros made of 3/8 steel, or 1/4" aluminum in the past.
  15. 86humv

    24v battery charging through NATO port

    Yes...positive center of nato .
  16. 86humv

    Noise from generator pulley?? Free spins on shutdown.

    You were told Jan 9th that its normal. Also...if bearing ever froze up...it would be a non-clutch pully and still work like the early non-clutch ones..
  17. 86humv

    Truck bought for parts, got it running, but…

    Motor is painted all black.
  18. 86humv

    Long Cold Start Cranking

    your EESS box under dash is probably bad, and it may have fried your glow plugs.
  19. 86humv

    M998 with Brush Guard - any off the shelf options for winch mount?

    Pictured are the winch style Luverne brackets. I used to have them made, but not enough people looking anymore ....and cost went up.
  20. 86humv

    M1114 B pillar question.

    The M1114 A, B, and C pillar area are the same as all other trucks....M1114 have added parts for up armor.
112,789members
166,307threads
2,342,320posts
783online users
Top