Search results

I thought about it for a couple of seconds but decided not to. I have found a new primary fuel and water sep. set up from CAT. The item number is 127-6649, it is designed for the 3126 series(7.2L) engine. This primary filter base has a manual pump so you can prime your fuel system with a few...

looks like an old pulp wood truck with a grapple and or lift on the back. you may have better luck using an old pole trailer.

since you have a low post count, no pics didn't happen.

if you have no lights it sounds like a bad 3 lever switch. If not take a bulb out and and replace it at napa.

contact pratt's towing service (903) 838-4102. I got mine towed off and one month free storage for 125. Ask for Randy

You activate your switch on the go? I always stop to engage & disengage.

a broken return spring make for some interesting driving, makes your butt puker. I would start with that.

Hey Jim, I'm thinking about going to UNT for the homecoming game would you be a good christian and supply your SS brethen with some of that contaminated gold. I won't be able to make it this year with my truck to the game. I would just get some cheap wally world 2 stroke oil.

pics or didn't happen. You could at least include the GL pics, that is a common courtesy you could extend to your SS brethren.

how do you like the Challenger combine? If you were in the market what combine what you buy?

I didn't see any insulation on the roof of the truck, are you going to put some in later? The build quality looks good.

where are people getting their tubes from? From what I understand you need 12.00 or 14.00 tubes and the stock flap works fine. Also the tubes need to be radial?

If you have to do a change the oil in the winter the best way is to make a fire then put the 5 gallon bucket in the fire for about thirty seconds check bottom then back in the fire. this will heat up the gear oil so it flows. We do this all the time during pecan season before we oil up the...

Maybe Caterpillar had better lobbyist than cummins or Oshkosh got better pricing via Caterpillar. Some people buy just based off of perceived perception and reputation whether the product is better or not.

I found some copper washers at a bumper to bumper auto parts store. They were very course so go some sandpaper and I was good to go.

I have my bolt inserted into my brake pedal, my concern is while I move the shifter I keep hitting the plumbing running to the master cylinder. I haven't yet mounted my pto. Is that were the adjustment of 5.63 inches comes into play. Thank you search engine. If you search you will be rewarded.

thank you

I recently pulled an m105a3 off base. While jacking up the trailer one side of the rolled while the brake lever was down. I blocked that tire and jacked up the trailer and pulled off base. I didn't feel like the brakes were dragging when I first started driving. I drove across the train...

I actually prefer the soft top to my hard top.

hit it with a BFH. I'm not sure what part you are talking. if you give me a page number I can tell you. I just assembled a winch and have to make an w/w into wo/w truck.