Search results

I have 2 brake switches...so both are in parallel ran to k6?

Yes they do and now that all makes sense Thankyou for that. If I run a new wire from the switches to cb76 that should fix it then?

Also seems there is something different about the 1088 brake wiring from one page I found in the manual.

Ya definitely no power at brake switches its a short to ground on all 4 wires. Going to look at the outputs on the main light switch and see if I have power coming out of what wire number??? This is my first military truck and God damn the wiring is complete bullshit... What is k6??? Or what is...

Also forgot to add that the brake lights appear to be stuck on...when ser drive is on all leds in rear multi lamps are light up, and when you hit turn signal the outer ring of lights flash not the middle 3....which I believe is correct but they dont turn off when you turn off signal light. Just...

I bought my 1088 with no lights working and missing turn signal switch, and almost all the relays and fuses were bad, in the wrong spot(12/24) and missing. After going thru and adding all the led lights and new relays, fuses, and turn switch I have all lights but no brake lights, and...

I am having the exact same issue with my 1088... -have all lights but brakes - hazards for some reason only light up in the front -no power at brake switch(all 4 wires connecting to the two switches at the foot valve are grounded.(probe power to any of the 4 on or off the switches and it pops...