• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. E

    MEP 805A Fuel / Start Problems - Repair Service in North East Texas???

    I have a MEP 805A genset that has 293 hours post level 2 reset. Installed a new pair of batteries and main panel was dead. I discovered both wires at CR1 were detached from the lugs. I replaced the CR1 Diode and re-soldered both wires to the lugs. Main panel now has power but I have a "no fuel"...
  2. E

    MEP-805A - CR-1 Diode and Resistor Part numbers and supply sources!

    My MEP 805A generator had no power to the entire control panel. During troubleshooting I discovered both wires melted off the CR-1 terminals. I am assuming that the batteries were installed incorrectly at some point. I verified the new batteries I installed are correctly wired in series for 24...
112,803members
166,324threads
2,342,447posts
759online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks