• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. T

    HOW TO: Tension V Belts on a HMMWV 6.2 Engine

    That sounds like an awful lot to me, but hopefully someone more knowledgeable will chime in :) The belts do flap around a lot at idle -- they should 'look normal' you push on the gas or pull on your throttle lock and if they don't they are probably too loose. I will say this -- the army specs...
  2. T

    HOW TO: Tension V Belts on a HMMWV 6.2 Engine

    It could be I'm dumb (I'm fully ready to accept this possibility! :D), but we couldn't get either the power steering pump nor the alternator to budge with just the breaker bar. With the power steering pump, because it moves in 2 directions (at least it does with the 200 amp alternator bracket)...
  3. T

    HOW TO: Tension V Belts on a HMMWV 6.2 Engine

    Hey everyone; So I did the 60 amp to 200 amp alternator swap, and I bought the 'real' kit so it came with really good instructions. I didn't have a lot of problems, other than my alternator didn't come with all the pieces it was "supposed" to come with (for example, the alternator is...
  4. T

    Safely Jacking a HMMWV

    Hey there; I have searched extensively but the signal to noise on results is really bad. My apologies if this post is duplicated elsewhere :) I want to do the geared hub / portal oil change on my newly acquired M998. I've done all the other fluids and this is the last one. I'd also like to...
Top