Search results

I am getting ready to hook up PU 794/G (modified mep004) 20KW genset. I have a 200 amp double throw transfer switch ,sixtyfeet of so cable for direct plug in , pin and sleeve connectors, and 1/0 to go from the meter panel to the transfer switch and back to the main panel. My licensed...

Well i asked the question here, because i thought that if it was answered here...Then we would all have the answer:wink: Ive bought alot of stuff from them before, so im aware of the email and 800# But thanks anyway

If you dont mind me askin...... What does a m105 cover go for from GMAcover these days?

I kinda remember them being 1/2 inch pipe thread with a bushing for the lower one. I bought a set from McMaster-Carr one time for one of my trucks.

50PSI is what they should be for highway driving, 35 PSI for off road and 15 PSI for sand and soft mud. They will only suck the stem in when they are flat,Under 5 PSI. Hope this helps you!

As these guys said, there are alot of running trucks around that you could probably buy for alittle more than 2K, If you go the GL route, you could possibly do a little better . Of course i havent seen any trucks on GL in maine though. Good luck.

:ditto:

The TM for the pump is " TM 9-2910-226-34 " It is here under the resource's tab, all the info you need is in that TM

Ive seen some of the trucks from dave, and they are pretty nice, I also know guys who bought from GL and then had dave repaint the trucks for them and they are nice also. Kinda kickin the idea around of having him paint one of mine.

Or we could give out fish infected with small pox ;-) There are some of the newer crowd here that are selfappointed knowitalls, who tend to be a little on the arrogant side and a bit disrespectful to others!

Well the rusty rockets here in new jersey, seem to be hittin the 2k to 3k mark these days ! Any body who have seen these new jersey guard trucks know what im talking about. I recently saw a very hammered m35a2 w/w go for 3600. and it was purchased buy one of the big dealers. I guess those...

They are getting around $175 plus shipping, This is a three color insulated top. I have bought a few and am very impressed with the quality and the fit!

Why cant there ever be free troop seats in NJ??? :-D

I think you can get them at Napa. Just take one out of the rear and take it along so they can match it up.

There is a cork insert in the keyway just behind the outer seal. when this cork fails the gear lube runs through the hub and down the inside wheel, Now while this is happening, it is washing all the grease out of your wheel bearings. So dont drive it till you fix it!! Some guys just use rtv...

I just installed the new yellow silicone one piece boots! They are real easy to install to ! I did the install alone and did not have any issues putting the outer clamp on ,Like with the old style boots . They are much heavier duty than the old black rubber boots Of course while i had it apart...

I just bought a set of the new Yellow silicone one piece boots, They are outstanding quality boot! I'll never buy the old style again. Good luck with yours.

Those NJ trucks are aluminum enclosure's. I have that truck on my watch list!

I have a shell extractor for 7.62 x39, maybe something like that for 8mm?

There are one piece boots that are far superior to the zipper boots, no leaks and they dont seem to fall apart as fast:wink: