• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Matt65

    m1009 fuel leak on ip

    Mine leaks as well, and continues to run great with good mpg. Some say leave it alone until starting or running gets worse. This is my plan as well.
  2. Matt65

    6.2 ticking noise?

    Any indication what caused the failure?
  3. Matt65

    What is the best modification you have done to your CUCV?

    Lift and tire.
  4. Matt65

    Increasing payload capacity m1008

    Yes it would! Firewood unloads a lot faster.
  5. Matt65

    Increasing payload capacity m1008

    Fireman, Im in the same situation. I plan to take the trailer route in the future with brake controller added.
  6. Matt65

    fuel leak at throttle shaft..... seal kit?

    Sounds like mine! Until the leak gets worse, I'm not touching it. The truck runs great and the mpg is still there.
  7. Matt65

    RED diesel fuel?

    The local Fire Dept runs off road in everything as part of their non-profit, tax exempt status. Probably not the way the laws are written, but a great way to reduce cost.
  8. Matt65

    Rim and tire set up

    The tire is a 37" Tall x 12.5" wide. This tire mounts to a 16.5" diameter wheel. I am running them on 6.75" wide x 16.5" diameter wheel as seen in the pictures. They are at factory GM backspacing ~4". The reduced wheel width (vs. tire width) increases the force required to remove the tire from...
  9. Matt65

    Rim and tire set up

    37x16.5 Hummer Radials on factory 6.75" wide GM wheels here. This set up has worked well for me. Link in signature with images.
  10. Matt65

    Battery disconnect switch

    My truck came with a keyed in cab disconnect. I am not sure how it is wired, but will describe how it works. When the disconnect is off everything is totally dead. Once the truck is running and warm I can throw the disconnect and it will keep running. If running and still cold it will kill the...
  11. Matt65

    What have you done to your CUCV today/lately? - Part 1

    Replaced the radiator fan clutch. The old one had 1/4" wobble.
  12. Matt65

    convert a srw to a dually

    I have a friend in the middle of taking the 3+3 cab off a dually for a short wheelbase conversion. The dually bed and running gear will be for sale, pm if interested.
  13. Matt65

    6.2 ticking noise?

    My tick is play in the water pump-bearing. I am getting about 1/8-1/4" wobble of the fan. Parts shoud be here this week. The truck is now out of service until the repair is complete.
  14. Matt65

    Noob with question

    Lifetime replacememt is good, what brand was the pump you got? I just ordered an ACDelco pump, and thermostat from Rock Auto.
  15. Matt65

    Air bags on M1028 dually

    Good thread, hope to see pics. I was wondering how much weight you are needing to haul. My 1008 will handle a decent load before squatting the rear. Planning any power upgrades?
  16. Matt65

    Transmission upgrade

    What TH400 characteristics do you want to improve on?
  17. Matt65

    Mirrors removed from windshields in M1009s...

    My mirror was in my glove box when purchased. After I replaced the cracked windshield I reinstalled as mentioned here.
  18. Matt65

    cucv tow bar $35

    Please take all the feedback constructively.
  19. Matt65

    Tiny Tach is in!

    :lol:
  20. Matt65

    Haven't posted lately

    CK, sounds like a lot of nice upgrades. Keep us posted, your build is one of my favorite.
Top