Search results

I would use the Deuces power boosters so the master cylinder on the bus would work fine. The engine axle clearance might present a little difficulty, but a little torch work and a hammer should help out there ! Or just cut and weld until it fits.

If you type in "federal guidelines for bus safety" you will see why. They must meet stringent standards for crash safety among others. My little design doesn't really show want I want to do. I want a 40FT bus. Then I would cut off the back half and reattaching it to the front making a small...

Yes I know YOU drive your Deuce, but for those who like to store it through winter my suggestions are mostly from the military's own manual for long term storage.

Nice to see another "Marine" here ! SemperFi Brother !

Yep. The best thing for long term storage, especially in winter is of course to treat the fuel. Let the engine run until the treated fuel goes through the whole system then shut it down. The next thing to do is remove the injectors and pour some good oil down each hole. Replace the injectors but...

This is a crud picture of what I had in mind, but it conveys the general idea. I really want a flat bed with a winch mounted up by the cab/cabin area.

True. I should have specified that as long as the tire does not move from the wheel rim it is safe to re-inflate. Now if after you let all the air out from the tire and it moves from the wheel rim then "Yes" put it back in the "tire cage" or remount it on the truck to inflate the tire. It is the...

Oh I so want those transmissions !!!! :drool:

Canvas tarps are fare superior to PVC in strength, but the elements destroy them pretty fast. Especially here in the wet Pacific Northwest. I had one that only lasted two years then "rotted" away. I suppose you can put on one of those additives that helps preserve the canvas, but I have found...

I was going to use 11.00X20 tires and keep the deuce transfer-case. Though I do have one of the MRAP transfer-cases. I might try and squeeze it in. The year of bus would depend on the DT466 engine. I prefer a "non" ECM (electric control module) engine. Much simpler to install. No need for the...

I was wondering about that myself. Maybe a call to the factory will bring clarification or just more confusion !

Your saying the driveline concerns are not valid ? Well I see your truck does well off road, now take it on the freeway and lets see how it handles. Especially lets see a emergency swerve to avoid an accident. Before you do go on the freeway it would be wise to add a full rollbar to your truck.

Well to continue my little tutorial on mounting tires, here I'm installing the assembled tire unit to the wheel. Align the valve stem with the wheel cut-out and lower the tire down at an angle. Then push down the valve stem towards the cut-out and slowly push the tire into the wheel...

I found that originally the first M35's came with galvanized wheels ! Some of my 1954 M35 wheels with the rivets underneath all the paint and crus where galvanized. Totally surprised me to ! Then I looked up the original NSN # and data chart and found they came galvanized from the factory as per...

The wheels are back. Now I need to clean them up a bit and start installing the tires.

Yep. Ready to go right now and get that little puppy from you ! I still need several parts to restore mine and hopefully yours will have them. The only reason I'm even doing this is because I have a small block Chevy housing for the Hydra-Matic and I want to install it in a Deuce. At this point...

Since it is getting harder and harder to find a shop that will work on our tires I thought I would give a short little "tutorial" on tire mounting for those who have never done it. Later I will show how to bust down a tire once I start on my other deuce. If you ordered new tires they will come...

Well you hit on a idea that I have had for several years now. Sadly I had my bus towed to the scrap yard this last summer, but I'm looking at getting a newer one with the DT466 engine with an Allison behind it. Most bus frames are 34" wide and made from extremely strong steel to meet federal...

Just be thankful you didn't throw a rod through the block. Dodging flying shrapnel isn't much fun ! There are many things that could have gone wrong here. Without having the truck in front of them there is really no way anyone can really determine what truly happened. My best guess at this time...

HaHaHa You win ! Even though I already bought a carton of "Cold Galvanizing Spray Paint" and two gallons of "Flat Black Paint" , I'll hold off painting them for awhile.