Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
South west corner of the Tuscon airport (runway is north-south) if you look on Google Earth. I think it's "Teds Trucks" and pictures have been posted of it several times here on the site.
Since the TV signals are LOS, you will need to factor in the height at your location and the height of the transmitter towers, plus any obstructions between the two points. There is an on-line program/app that will give you directions from your location to stations within about 100 miles. Is...
Look in the tank and make sure it has fuel, then using 'soldier B' to flip the switch on, stand by the tank and see if that is where the noise is from. If not, try other places.
Fair Radio in Lima Ohio probably has some, but then again Memphis Equipment, Eastern Surplus and a number of other site supporting vendors probably have a few, since the tie down is common to almost all the antenna systems. You may want to tell them what type of vehicle you want to tie down, in...
All the ones in the paint department I've dealt with were very happy to learn how to do that. Particularly after they saw they could match the Federal paint codes and could then satisfy 'all' government paint contracts (most all state and local authorities use the FSS paint code numbers - or...
You should be able to go to the paint store and have them look up 'competitive paint', find the FSS (Federal Supply Service) listing then put in the '34052' FSS paint code and they can mix it. Because there are so many different mixing machines, and versions of the software the codes on one...
USMC gets a lot of stuff that never has a dataplate, or govt info provisions. Army has data plates made for the experimental vehicles (IE., XM-???) before deciding whether to purchase or not. Then, there are 'special units' that get whatever equipment they need at the time.
From the Phoenix area, going south and picking up I-10 will get you out of snow from there east through the southern Rockies. Then switch onto I-20 where it joins I-10 and head toward Dallas. I've been that route in January and only saw snow on the distant peaks.
M D Juan made and still makes repro bodies in the Phillippines and sells them here in the US through a number of suppliers. As stated above, the current retail price is about $2600.
Check with patracy as to where they should be posted. Copyright used to run for 28 years after publication, but that was extended some decades back, and I don't remember when (and haven't looked it up). However, anything that was past it's expiration date was still expired. So 59 + 28 = 1987...