Search results

CUCV rear bumpers, new old stock $250 each, eight available. CUCV Blazer rear tailgate 'door' NOS, but has some minor dents, $325. Rubber mallet would probably pop them out. Will only bring what has been spoken for.

L999here sent me six of the files, the smallest being over 8MB, and they are 5184 x 3888 pixels - that does not fit on our pages very well. I'm shrinking them to 1280 x 960 and will try to post.

Whether it's running or not, you need to come up to the VA Rally over Labor Day weekend (look for the thread Graves Mountain Rally ) where you can get plenty of free advice face to face (but behind masks due to CV-19).

You may have to save a copy of them in a reduced resolution (same physical size, but saved in JPEG format with compression). If you do not have the software to do it, PM (start a conversation) me and we can discuss a way off-line.

First picture is the air vent ending for the MC, trans, TC and the axles so they don't build up pressure as they heat up. Not every truck has them, but all should. Was sometimes put on as a part of the deep water fording assembly from what I've been told.

Just in case you get the CK before the drive arrives back to you, here are three pages from the TM on how it is supposed to be laid out.

Mustangsud, I have the (now superceeded) TM for the CK on the MKT USB Drive if you do not have one and cannot find it easily. It was replaced by an electronic version in the past decade, with a lot of updates that are no longer available to the general public.

Best of luck to you finding a 'new' part. The rear wiring harness connector is an integral part of the wiring harness itself and it is unlikely to have ever been stocked outside of the level 5 depots (original manufacturer level for those not familiar with the military five tier maintenance...

Once you are in the DRMO system, approval comes pretty quick. But, now that many people are not at work because of COVID-19, it could take longer because there are not enough people to process them. Back in 2008, my first EUC took six months, my second, three weeks.

You are talking about this connector? I pulled it off a deuce that we are scrapping.

Top four in the first picture look like the Auxiliary Baking unit. Heaviest piece goes in the bottom of the M-59 on top of the channel that the pot holder runs on. One with the chains hangs in the middle with the hooks going in just below the top of the body of the range (you can see them...

Flip it over when you use it and it will flatten out. They were built so the could be flipped over (end to end) on a regular basis. BTW the rod sitting on the griddle in the first picture is to hang utensils, fits in the inside corner of the roof.

Send for my MKT-USB drive, which has the Ft. Lee booklet on how to open it up and close it down, along with another six or so GIGS of PDF files related to the MKT's. You send me a USB drive of at least 5 GB capacity, and I'll do my best to fill it and return to you. Start a conversation with...

I have a deuce winch mounted on the frame extensions and front bumper, plus the drive shaft and a number of other parts, but no PTO. I'm never going to use it - I don't take my trucks where they are likely to get stuck. With a little help from my friends, I can get it to the Rally if someone...

Thought I'd ask first!

Cabell, do we have a buy-sell-trade thread for the rally? I've got something I'll never use that needs a new home.

If you were coming to the VA Rally over Labor Day or know someone from closer to you that was coming, I could hand it off there. It's a pull and looks clean inside, complete with a couple of ounces of fuel. Main problem is it's a MEP-003A tank which is by itself 24.5 x 14 x 9 inches. It is...

If only you were closer, see attached.

We will make room for you!

Charleston has their Veterans Day Parade the Sunday before Nov 11. After a multi year hiatus, the MV crowd is being invited back to Patriot's Point, arriving on Friday and having exhibits there Friday afternoon and Saturday, then convoy to the parade and be the lead vehicles that Sunday...