Search results

Nice! Nothing wrong with that since I bet you'll use it with heaters. Belts are what they are. Depends if they're cracked up or ok. I do keep one extra set though just in case. Sent from my SM-S906U using Tapatalk

Awesome!! I'd say from most that get one that doesn't run you're several touchdowns ahead! That glass is easy to find or another topper for where I am...no idea about how you get parts like that in Alaska. LMC has glass but some companies don't ship up there. Probably pop some plywood over it...

Got the rear painted up nice a few nights ago and applied lizard skin sound control. It really gets the job done and is easy to use. It goes on Grey then dries into almost black. It'll get painted flat black next week. We found his blazer is very loud in the back with no carpet and just metal...

There should be one in a pinned post in the genset section. Sent from my SM-S906U using Tapatalk

There's diag stuff in the tm if you feel like diving down that road. They aren't to tough to figure out. Temp guage you can see if it's warming up with a heat gun on the thermostat housing. Sent from my SM-S906U using Tapatalk

I see a front end that could be mounted on the side of the barn yet! Hood looks great! Sent from my SM-S906U using Tapatalk

Absolutely!! We'll be up!! Sent from my SM-S906U using Tapatalk

Did the 19 lb rad cap pull coolant and not hold pressure? Sent from my SM-S906U using Tapatalk

That clutch part and lock mechanism as well as the window guides lmc has unless you have a set laying around! Those window gears are not around to much right now so I hope you have one of those! Looks like a decent project you got there. Yes this rain is weird...none all summer then now all...

Thats not a big deal really in the scope of things! As long as it starts good. Sent from my SM-S906U using Tapatalk

Yeah I don't have that on any of mine but I know it works. Make sure you don't run them to long they'll expand and stop working....then that'll be an entirely new thread to fix. Sent from my SM-S906U using Tapatalk

Yes the resistor is only used for direct power from both batteries through the glow plug relay to the glow plugs in the stock setup. Other than that it does nothing. So in theory back to your belt squeeling issue, one battery getting the glow plugs going will definitely load the one alternator...

As far as the alternators go for the glow plug resistor they don't really have anything to do with how it gets power since the battery/s do all the work. I like the 24 volt system even though all mine don't use the resistor. The starter is about it on the engine. I use the jump port for running...

The splitting is actually extremely simple. The resistor gets its power from the fire wall junction box which both batteries are hooked to giving it 24 volts...this is stock. Removing the resistor only requires running the power wire to the glow plug relay from the 12 volt junction box next to...

Good deal on the batteries..the block I should have said where the 12 volt line comes from the battery to the firewall. Pop a heat gun on that too just to see if you have some resistance on the connection. Headlights draw some amps but not a ton. The blower motor on high should pull more...I'd...

The resistor bypass does put the load on one battery vs 2...goes directly to 12 volt vs being knocked down from both batteries 24 volt to 12...my guess would be the battery is weak and the headlights load is bringing it down. Put a volt meter on the block and see how low the volts go. Are the...

Sure! Do one belt at a time so if the noise goes away you'll know which one it is. Once you get both belts off the water pump don't run it to long though. Sent from my SM-S906U using Tapatalk

More surplus store scores today. Got the gm mount for the blazer fuel can in the back plus the pintle mount and cross bar for the back. He put new bolts in the pintle and wiring mount. It is fun finding this stuff since most of them don't look up what they fit and the price is great! Sent from...

Yes you gotta ask for the sf97 when you pay for it. You get a Sf97 for the trailer...then wait months until that gets done. You take that form to the notary and they submit it for a title. Sent from my SM-S906U using Tapatalk

Hey just out curiosity if you want them I have nos pintle mount and the square bar that connects under it if you want new. Mount is painted light green and the bar is black. Sent from my SM-S906U using Tapatalk