• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 73m819

    Hi, New to site

    Welcome from Gainesville
  2. 73m819

    Official 2014 SS Georgia Rally Info SSGR14 thread

    Being that we have so much radio discussion, maybe a separate thread could be spun off so to keep it in one spot instead of spread out though the thread.
  3. 73m819

    New Guy From Georgia

    Hi from Gainesville
  4. 73m819

    M923 NHC 250 Injecion Pump Problem

    NOS (new old stock) = dry seals, it is not that hard to reseal the ip, I did it on the 819, sure wish you were a lot closer, I would do it for you.
  5. 73m819

    2014 Va Rally at Graves Mountain Aug 29-Sept 1, 2014 (aka, Labor Day Weekend).

    I was looking for civi dodge paint, but I see that part of the stayed hid.
  6. 73m819

    Does anyone in North Alabama have a tow bar for a deuce?

    I am in Gainesville GA. you could come and take pictures, how long do you need to borrow it for and what are you going to pull.
  7. 73m819

    New guy with a new ride seeking winch purchase advise

    That is the same winch that is used on ALL the 5Ts, only the 939 series had a adaptor for a hyd. drive motor. Pull the adaptor then you should be good to go, the only things you will need, will be the cheek plates, the lower mounting angles (you could make both of these ) and a 809 winch drive...
  8. 73m819

    Bikini on a CUCV

    I have intel that the PAINTER is/was working as a wood butcher and is looking for other wood building projects to do.
  9. 73m819

    New guy with a new ride seeking winch purchase advise

    That is a 5t winch off a 936 wrecker, it is missing the drive motor and mounting plates/lower mounting angles, You could make the mounts but you can not use the hyd. motor (if you find one) because it will not clear the lower cross member and radiator, you can pull the hyd. drive adaptor then...
  10. 73m819

    Axletech isas 4500 steering set up

    That does not look that hard to fab up, a pair would give you 4 wheel steer, this would be a fun build, I agree that a 939 series would be a better base to work with then a LMTV
  11. 73m819

    Tanks off-loaded from ships on 10 tons from Vietnam

    King pins can be changed, that would be very heavy for a 818 to pull, also doubt the 818 can keep up with the air demand
  12. 73m819

    Hello, new guy in Jasper, GA

    Hi from Gainesville, Being Jasper is a stone throw away, where is your store ?
  13. 73m819

    Official 2014 SS Georgia Rally Info SSGR14 thread

    As far as ladies at the rally, I would say a easy 100, a awful lot of families make the rally, this can attest to the kind of rally it is and the over site to keep it that way.
  14. 73m819

    Deuce was dead on side of the road.

    Will check later.
  15. 73m819

    Deuce was dead on side of the road.

    Should not be any oil spill unless the motor is dumped over, the anti freeze makes great weed killer, just can not get it to close to the front lawn because if it hills the weeds, I won't have a front lawn, though that works for me but not my wife.
  16. 73m819

    M1070 inspection/loadout/road prep in Atlanta or WI area

    Yes, pm has been sent, 1 hour or so from ATL.
  17. 73m819

    Official 2014 SS Ga. Rally buy/sell/trade thread

    I can not use all 4 of the red ones but could use 2.
  18. 73m819

    IronPlanet.com Selling Military Rolling Stock SOON!

    A BAD typist, typing fast.
  19. 73m819

    New to me m108 2.5 ton crane/wrecker

    Yes on a trailer, it was thought that the tiers were not road worthy enough for a road march.
Top