• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 155mm

    Stud Pilot Wheels

    Short story about multi piece tubed tire.... coming back from Az with M970 tanker, got a flat, no biggie, i have a good spare, big truck stop pilot, petro, ta.... would not even change the flat to the good one, had to limp on a flat 30 miles to an independent shop to just swap tires due to the...
  2. 155mm

    Stud Pilot Wheels

    I would change them to any type of tubeless style. i run a hercules h703 , there is also a h304 and h307 that is big lug open shoulder. https://www.herculestirescommercial.com/our-tires/medium-truck/ with the tubeless hub style you can get tires anywhere and anyone will work on them with no...
  3. 155mm

    MEP-802A electrical output hookup

    4.2kw gasoline https://www.ebay.com/itm/Used-4-2kw-28vdc-150A-Gasoline-Generator-Set-by-Continental-Motors-Military-Sur/201983677180?hash=item2f072a52fc:g:I3wAAOSwuq9ZZBxP 3kw...
  4. 155mm

    MEP-802A electrical output hookup

    If your battery bank is 24v, why not use a 24v generator?
  5. 155mm

    MEP-804A - intermittent cranking, no starting

    Mpu is first culprit everytime on a no start, even if you know it only ran out of fuel. Ac voltage should be less than 3.0 but more than 2.0 vac Hand primer pumps are notorious for leaking, failing to maintain prime. intermittent cranking sounds like starter, attempt tapping on starter with...
  6. 155mm

    MEP-802A electrical output hookup

    The way I translate NEC, which means..... in my own opinion, which is only worth what you paid for it...... ground box, ground generator, but only bond neutral to ground at 1 point. Grounding points must be more that 6' apart. Electricity is always looking to return to the source, so my choice...
  7. 155mm

    MEP 804A shutting down

    Josh, start your own thread, dont hijack someone elses post
  8. 155mm

    MEP-816B 60KW problem

    Or you could sell it to me, i need a 400hz generator to test my 400 hz load tester
  9. 155mm

    MEP 362

    Its a turbine, 10kw?
  10. 155mm

    MEP-816B 60KW problem

    Is it for sale?
  11. 155mm

    MEP105A Gen Starts and dies

    First thing i can think, holding start switch in start position until oil pressure comes up
  12. 155mm

    M916 6x6 heights

    128” over horns, remove wheels 118”, remove wheels and steering tie rod 116” Truck would be sitting on diff pumpkin not on drums
  13. 155mm

    Mep-804a power output problems

    Start a new thread as to not hijack.
  14. 155mm

    MEP 804A shutting down

    803? You mean 804, right?
  15. 155mm

    Its cold outside lets talk Heaters, H81, H82, H83, etc.

    Did the viewing window clean up or does it still look dirty?
  16. 155mm

    Needing a starter switch for MEP 805A

    That thread zed posted above, tm 9-6115-644-10, adobe reader page 54, or tm pg 0005-4
  17. 155mm

    Needing a starter switch for MEP 805A

    You said the hz gauge only goes to 11 o’clock, are you sure the hz selector behind the gauge cluster is selected to 60 hz?
  18. 155mm

    Needing a starter switch for MEP 805A

    I wouldnt,, i would use conv plug, or load lugs. I prefer conv plug, it has juice all the time
  19. 155mm

    Needing a starter switch for MEP 805A

    I use an external voltage hz gauge as a backup that i plug in to convenience plug. Its not precise, but works to verify AC Multimeter 6in1 Combo Meter Voltage 110V 220V Current 100A Power Factor KWH Frequency Multifuction Tester...
Top