Search results

Ebayyyy is not the only place for parts...Wanted post here is good.

12v .....will burn up. OEM is best....and also available cheaper than fleebay. Put a wanted add.

Originals are not hard to find. I have replacements

A2 harness will need mods to mate to a turbo eng. harness. Body mounts are the same on A0 to A2 early. Later ECV / REV trucks have the purple newer mounts....same size, they don't compress as much as rubber ones and they add a 3/8th to 1/2" spacer between mount top and body for turbo trucks. A/C...

Connector is MS 3106R14S-6s Total length 69''. First breakout is 48" with 3 wires : 27N male, 27M female, and 57L ring lug. 69" end : 2C is a ring lug, and 2B is a female.

Tach hooks up to Alt. If the tach has the round connector. Only the buss bar tach hooks to the tach drive, which you don't have or need.

I have these for the standard silver bearing and the thicker black bearing....takes 12

No, unless you have an Ambulance harness.

Here's the connector : cir030rv-14s-1s-f80 They are over $ 68 on net, and might have to buy sockets extra and they are crimp type. I have a used one with 8" of wire sticking out. You can splice on to it. $ 30 shipped

I got new starters

Antenna bracket on fender.

Heres a snap of the video he sent :

He has a redot AC system, thats why its longer.

Looks like : pn. 00015105, nsn 5340-01-290-6234 # 65

There's a vent line on top tank plate.

I shipped at least 75 times from so. cal. to almost everywhere...except Colo....they don't accept like most places in Calif.

.

Cucv's are 12 v

not needed

Depends on rear yoke