Search results

My master power switch on the deuce has two sets of wires which bring power in and have it flow out, so each one is only handling half of the power that needs to flow through. Pretty much everything else is handled by relays. If you want a real master kill switch, you need something that...

All the one's I've seen have an adapter plate. I'd like to get about three or four adapter plates (for mine and other trucks at the club compound).

You have three phase, but that means you should have common and neutral bonded together somewhere. The biggest, longest, fattest pin is the ground, so all you ahve to do to find common is find one pin that is shorted (zero ohms) to that. All the ones I've seen use the standard Black - phase 1...

I have used a Solargizer to charge a 1AH battery successfully. It took three MONTHS! And it takes that long to recharge it also. After you do the math, get the correct tool to accomplish the task. You've already been given more information than you need by previous posts here.

Deuce caps I have (all seven of them) can be set to vent or not. It's what came on the trucks. YMMV

I bought a 12 inch riser from Northern Tools (other places have them also) and use it to pick up an M105 from Poppop. With the pintle in the topmost position, the trailer rode level behind a Dodge 2500. YMMV.

34 inches outside to outside on the width of the frame. OAL can differ a bit. Regular cargo trailer is shorter than a generator trailer by 13 inches. MKT is also a bit different but not as much as the generator trailer bed (at 123 inches). Get your own trailer and measure to your heart's...

No muffler on the turbo. The swap over kits I've seen on e-bay look like they have everything but the turbo itself. Some people put a muffler on the vertical stack, but there is none underneath. You do realize that to make a plain LD-465 into an LDT-465, the only thing that is changed is the...

Make multiple copies of the CD manuals, that way you can afford multiple generators (and other stuff)!

Last time I was in Montgomery, the Alabama Guard still had one out back of the DRMO site. GPS 32.404443, -86.258984

Early deuces had a single arm with a small round mirror. Most have 'west coast' type mirror assemblies. For the mirrors themselves, most of the usual vendors (Eric's, Memphis, Saturn, Boyce, Murray, Newstar, etc.) will have them in stock. For the frames and the rest of the hardware either one...

Not the correct recon unit, but this is a restored vehicle that was in the battle of the Bulge. I would assume other vehicles in Third Army would be marked in a similar fashion.

Just in case someone wants to look at it, here's a drawing of the box with the various compartments marked.

I've got an Atlanta Interstate story too, but you'll have to come to the GA Rally in Oct to hear it!

The one mdmorgan has for sale!

Drew, I didn't HATE the TRS-99, just did not like the mess of cables. main box to tape drive, main box to speakers, main box to keyboard, main box to the cartridge box with it's own power supply cord, RCA jacks to the TV, ad nauseum.

Dell, I was geek when geek wasn't cool! Still have all issues of "P C Tech", many issues of "P C Magazine" including (unless the box has been tossed) the 'Sears catalog' December issue that went over 1000 pages (in Jan they split it to two issues a month), and wound up sending a dozen or so...

Eric (doghead) will be proud! You read the TM and were able to answer your own question! Congratulations, you have now joined the elite of the SteelSoldiers by using your noggin and reading!

In the upstate, you have the Military History Club of Carolinas in Spartanburg (c/o wlschotes at charter dot net), and in the Midlands, the Military Vehicle Collectors of South Carolina (MVCSC) (www.themvcsc.com). And there is the SC membership map thread >...

Osborne, the first luggable computer! I remember a demo in Rock Hill where the salesman tossed it up in the air and let it hit the floor, then opened it back up and booted it. Worked fine but I wound up buying a Compaq with two full height 5.5 floppies, replaced them both with half height ones...