Search results

It is a shoulder bolt ? See in TM 9-2320-361 24-1 Many don't look into the Work Packages but there is much good stuff in there with all the descriptions and drawings and part numbers. Part #11? WP 0133 00-00 and or WP 0133 00-2? Anywho It is all in there. If you want to know how to search...

no photos soft brake lines replace?

Most everybody in/on SS will egg you ON and give whatever We got Work Work Work

Methinks that the harmonic balancer is an essential part of any engine and is almost always overlooked. Years ago I was reading all the posts of rods and things holing these multi-fuel engines and did research. It is not just over revving an engine that failed the internals, it was the moment...

Mathematically, horsepower equals torque multiplied by rpm. H = T x rpm/5252, where H is horsepower, T is pound-feet, rpm is how fast the engine is spinning, and 5252 is a constant that makes the units jibe. So, to make more power an engine needs to generate more torque, operate at higher rpm...

It has been proven beyond Doubt that some can and did put almost any engine/transmission into almost anything. You do what it is You wanna do and study and drive it. Others have had much fun an learned much. https://www.youtube.com/results?search_query=Deuce+and+a+half+rat+rod

JUst make one

WWll nothing got fixed. It was financed and built and paid for and put in the ship and delivered. It was written off the books when it got paid for. Maybe Koreas stuff began to get fixed, I don't know...

Torque means more about horsepower than horsepower does.

I so old I used elbow grease and 9 feet of pipe on the lugnuts. I not gathereing tools anymore. Selling everything

Now you got me goin thru 1.6GB of files just to show you how it should be done Should I post?

This is Opposite of low flying but thought I would just stick it in here......... So while I been asleep for 20 years this happened. Crewed automatic and manual 99 flights https://en.wikipedia.org/wiki/List_of_human_spaceflights_to_the_International_Space_Station Uncrewed automatic 132...

Just think that if We all knew what were doin...................

So do I gottah work hard and resolve this or is somebody gonnah tell ALL exactly what it is, what is needed? There IS metric threads in a Deuce

as to Post #23........ ....from a very old flame heater delete post here in SS. I leave it as I found it. I do know what the plugs are supose to be that go in the elbow on the deuce. Both are METRIC BOLTS.....The larger one is a M20-1.5 get what ever length you can and cut it down to make it a...

One can just make their own seafoam or buy the commercial product or just go to HD and get a can of naphtha and put it in the tank. Problem is ULS diesel fuel being sold as diesel is not enough for old trucks.

Letssee " Just glued together with 50+ years of dried grease. New parts going back in next week. " Me thinks somebody should have performed all the TM's within the last few ours of running it. Why do I bet is was supposed to be GAA and got substituted? Hey, but what do I know.

The only metric thread on a Deuce engine exists Study

Get a life

Feed "em, disperse them