Search results

Yes, on the rears. I bought all my parts in a kit. If you piece the parts together you are going to find the spiders are the hardest parts to obtain. I have not nor have I found anyone who has found a viable alternative in an s-cam to retrofit the Rockwell top-loader steer axle.

TUBE -TYPE; MULTI -PIECE

I changed over my 1100R20 Goodyear G177's on split rims to 12R22.5 Firestone T-831's on 22.5" x 8.25" tubeless stud-piloted 5-hand hole steel rims. I found the 5-hand hole rims to look the best, however not the easiest to find...

Thanks! I did notice it is a lot faster on the uploads now. The "drag and drop" feature is really cool. It was always easier to re-use photos already in the archive and it doesn't clog up the server with duplicates. So, are we able to access our photo archives now or after the add-on?

How does one access their archival photos in case you want to repost an older photo into a new thread or thread response? This photo is one I have uploaded to the old site previously, but now I re-attached it with the button below from my home files.

Merry Christmas!!

Photos for comparison. If your PTO looks like the pics, its for the Spicer.

That certainly looks like the right PTO for 6452/6453 Spicer. That model number throws me off though. It doesn't come back on parttarget.com

roflrofl This is the gasket I used. It set the right gear lash for me. Here are the specs... https://www.parttarget.com/5330-01-396-0000_5330013960000_5330002343317.html/-B3E2D75C-4B27-4DFE-907D-540BAAF101E7 I did get a .010 and a .020 for safe measure, but did not need them.

Those M915 battery box kits are not as easy to come by anymore. When I got the first one in late 2015 it was from a nearby to me SS member, Artisan. He had a grip of them! My second box I tracked down again here on the classifieds. The member I bought it from is in Arizona. His neighbor/friend...

Winch, yes for M39, M809 and M939-series trucks. I am not sure what that PTO fits. However, I do know the mechanical driven winches on the M39 and M809-series trucks with the Spicer 6452 or 6453 transmissions use Dana 002224-2 or military part number 7409588.

I just recently replaced both front and back seals on my PTO's shift shaft. It was leaking like a sieve from the front seal. I decided to pull the PTO and do all the work on the bench top. It's "more better";-) than beating your head up underneath that beast. Removing and replacing the seals is...

In case you didn't see the thread, I swapped mine out for an M915 box. https://www.steelsoldiers.com/showthread.php?148460-M915-Battery-Box-on-M809-series I like it so much I did the driver's side too. https://www.steelsoldiers.com/showthread.php?181385-M915-Battery-Box-to-M809-Tool-Box

Well, I'll try it again. What can I lose? At a local Veteran's Day ceremony this morning.

That fridge is/was the objective at a battle reenactment :shrugs::shrugs::wink::wink::D

Rope is 5/8" steel fiber reinforced right hand lay.

I had the same problem on my old juice brakes drums (before I switch over to M939-series front drums). The right front drum had one left-hand stud infiltrator.

I am looking at a 33si. It's an M809-series install.

Kicking this thread back up. I have found these three brackets when I run searches through a number of different websites. They all appear to have the same basic dimensions and bolt patterns. Does anyone know if they will mate up to the the lower alternator bolt holes on the NHC250? Ford p/n...

I had been studying the Fuller FSO-6406A and FSO-8406A six-speed OD manual transmissions. I was seriously considering pulling the trigger and installing one. I found a clutch housing that would work with the push type clutch. There would also be modifications necessary to the cab tunnel as the...