Search results

Well, thanks to so many for their kindness and helpful direction on so many issues, since aquiring my M929A2, it finally gets to show it's colors (other than the beautiful tan) this Friday. Only a small, on site, one but that's how I wanted to put it to the test anyway. Gonna move...

Anyone know a good source for them? Here's what they had on mine and it leaks if parked with driver's side lower than passenger side. Seems too skinny and won't center on cap.

M929A2. Okay, I know to drain the third down first, then fourth down, then first one, then second one down. Thing is I have been doing one at a time, and by the time I get to the third and fourth to be drained, the tanks are nearly empty. I hear something let loose two or three times (varies)...

So are these relay valves rebuildable? TM don't get into specifics, but my rearward one has a small leak. I can press on the disc and the rubber that is surrounding it and make it stop. It don't appear damaged or as if it could even seal by that piddly rubber surround. Maybe there is a seal...

So I had the truck out for a 20 mile or so test drive yesterday. This is the longest drive I had taken with the truck to date. It started raining and I ran the wipers but after a few miles they just stopped. Looked at the gauges and they were around 50 psi. I pulled over and set the parking...

So I cannot build any air pressure and since these need rebuilt every few years anyway I thought I would eliminate the air dryer. Here is what I found. PURest by Haldex. A seller on some bay is selling them for a bit less than the rebuild kits to rebuild my Pure Air Plus unit. Only 3 holes to...

I was lubing my truck to day and noticed a grease fitting on the bottom of the steering box by it's input shaft. The only leak this truck has is that seal where the steering shaft goes in the box. Figured maybe some lucas power steering sealant/revitalizer would go in when it needs added to. So...

M929A2 Don't Compress Air With Bed Up? 1.) So today between the rains I was lubing my newly acquired dump truck and had the bed up to access more and let light under. I wanted to move forward an inch or so to gain access to the u-joint grease fittings on the propeller shaft between the...

Okay, I searched the search function several times with different key words to no avail. One of my tail lights on my recently acquired truck has a 4 bulb led for black out lights and the other is just the smaller single element bulb like a 12v (older)vehicle would use for the license plate...

Okay, now the horn. I looked all over the search function to find lots of posts on dueces but no breakdown for 5 tons. Traced my lack of horn to the wire in the shaft. Got 24v at the solenoid positive side. (wire 25) Unplugged the wire from the box at the bottom of the steering column and the...

First post here. Just got a new truck and working on issues before title arrives in months! I know, this again! Read the TM and searched this forum over and nowhere is it explained very clearly how to step by step troubleshoot this evil gremlin. The TM mentions that battery voltage should be...