Search results

here is the hitch where I broke the rubber piece off turning around in a parking lot glad I have safety chains lol we took it off there the whole towbar and took it to the house and welded it then put it back on way safer than before

also I would not try tying them straight with the shelter unless on soft dirt or something because the mounts on allot of shelters are steel on aluminum and have a little corrosion because of that I do not fully trust the mounts on some and I have checked mine for strength also if using the...

cool I have allot of trailer skills that most people don't I back mine loaded or unloaded allot it is easier loaded but you have to know when to steer allot more than a regular trailer I back mine up to a pallet I use for a porch about 80ft each time I move it and I usually get it on the first...

from this ring on each corner up to the shelter dolly is where I plan to mount them

I don't plan to go to Kalifornistan at all but when I start towing mine more which is soon I plan to make a safety chain setup on the dolly set to connect to the lift/tie loops on the bottom of the shelter incase of breakaway

I live in my shelters btw in an S280 and a SPAM (Shop Portable Aircraft Maintenance) shelter dollys don't bolt to SPAMs btw the holes are about 1 in off from the other shelters in height now sure why so I tied mine on it to keep it on also the hitch rubber on some of the dolly sets is junk and...

takes allot of room to turn also easier to back with a deuce than with a pickup mainly because of traction

they tow pretty good but turn like a semi trailer

also idk how to get that post stuck to the top of the thread

I'm the one who mentioned this method earlier btw it works great I figured this out when I got mine and tried to tow it 30mph taking up 3 lanes lol

I still have a pic of mine asaja

It only twists so far because it has a flat spot on it keep hitting back and forth on top of the ring

Tried hitting the top of the lunnette on each side like your trying to twist it also use pb blaster

awesome

here is my m116a1 I have been thinking about either finding wheels with the same pattern for spares including originals (maybe izuzu cab over 5 lug bud wheels) or an 8 lug axle swap with brakes or an 8 lug hub swap brakes or no brakes

anyone confirm a hub swap from a1 to a2 without getting a whole axle ? if so I want to go that route also another thing I noticed today some iszuzu box trucks have a 5 lug 16" dual wheel that looks like the same lug pattern as the m101a1 anyone ever tried those rims on a m101a1 hub

My s280 stays portable like an RV and my spam shelter stays on-site with stuff I don't need on trips like a full kitchen and living room

Yes I do plan on it found a small portable windmill that puts out 400 w for about $ 500 and it easily disassembles for transport

Idk kinda new to that part figured allot of people on this post was getting rid of their old ones also do I need to delete those and if so how do I do that