Search results

Back ordered out of stock and want big bucks I believe.

He folks, I have a friend off grid who has a Mep 003a and he fired the main switch. The one that controls the fuel pumps, glow plugs and starter. Any help as where to get on ASAP and not break the bank would be appreciated. This is a great guy and would be appreciated. As Always Thanks. Bob.

Sure it's been discussed, just can't find it! Do's and Don'ts for towing civilian 5th wheel camper behind or with 1088. Modifications needed, or any useful intell on heights!. Thanks Bob.

Thoughts of putting it on a deck is to get it off the ground for ease of servicing and to partially enclose

Will be far enough away and will probably end up with partial cover as well. Some one posted vibration dampers awhile back wish I save the Intel!!!

Getting ready to permanently mount Mep-002a have plenty of room and will be located at an outside service disconnect. Considering PT deck construction to elevate for easier servicing of unit. Any thoughts or pics of other permanent mounts.

Gl sold their soul, then tried to sell ours too! Fort Drum generators were junk and misrepresented! Seems like staff just didn’t care as well!! Glad there gone!! The 3 803 trailer mounts i’ve gotten out of Chamensburg gov plt were well represented and solid units! Agree they have dried up!!

1st page of this thread has all the parts # and a direct link to Croft trailer & correct part!! Believe it was dougco1 post

Was able to install new shock from Croft trailer, made all the difference in the world. This was on my 803A gen trailer, stops like a dream now. I've gone ahead and ordered 2 more form my 101A3 now that I completed this install. Found unbolting the slave cylinder gave enough play to put the unit...

Was able to locate them at my local Hardware/electric store! Thanks

HOORAY found the correct fuse up and running and charging!!! Life is good! Will down load TM's PROMISE! Thanks to ALL for the patience and tolerance!! Bob

Is this fuse available at auto parts or does it have to come out of electrical supplier.

Thank you. I'm using the voice activated text. So it's interpreting my words for me. I'll stop and pick one up at the auto parts store on my way home, install it and see if I'm charging.

Embarrassed, embarrassed, still embarrassed! I just checked fuse one and guess what there's no fuse in there . Headed in the work does anybody know the size of that fuse I'm not near the manual or anything like that. Would like to pick one up on my way home from work . As always thanks for the...

[headed into work will start trouble shooting hopefully soon! Will need plenty of advice!!! Thanks QUOTE=DieselAddict;2112050]Not charging and your amp meter sounds like its working. Need to check the charging system fuse (I'm at work and can look at the manual). If that is good you will need to...

Batteries charged, start generator read 3.9mv on studs of meter control panel read 24.9 volts on slave port studs . Control panel meter stays in red 2 clicks left. Unit is 2011 letterkenny reset with 275 hrs. Everything thing else seems to operate fine not sure if alt was working before, new...

Out of time today will verify tomorrow and report back!! Thanks

I'm still lost, according to my panel meter they are not charging. The batteries load tested ok. Is there a way of reading the alternator to see if it is producing 24 volts or if they are charging. ???

You're so right!!! 39 years married and finally I was right!!!! And it only took 10 years waiting for a sustained outage! The short little ones it was me showing off hooking it up or just exercising it!! Never thought I'd be so happy to loose power!!!

Ran Strong 28hrs Ran 28hrs continuous from 11pm 2-1 to 2:30am 2-3 no problems, had 3 other families join us. What a pleasure to be able to hook up and run 15 minuets after power failure. You guys make me look like I know what I'm doing, so as always thanks for all the help, this was my first...