Search results

The locker does not know what transmission is in front of it, it's YOUR driving technique that allows it to go smoothly through a corner, or all Herky jerky . If your truck is going to spend most of its life on asphalt, then take the locker out of the rear, and lock up the front instead with...

I inadvertently discovered that you can see that unbelievably annoying buzzer from the passenger floor, it has one wire, it goes straight up to the bottom of the buzzer . It's pretty much in the center of the firewall, wire came off pretty easy, absolutely by far the best mod I ever made to my...

Feed the inlet of your injection pump with clean air free fuel via an elec pump from a jug . If you get it running and the problem goes away then you know its getting air from in between the inj pump and the tank, the lift pump is often the culpret or old crappy fuel lines/fittings With an...

Greetings from Jacksonville OR 🇺🇸

I have combat rims on my WC-51 and they look different to me .

Bet good money Its a 6x6, it sets tall, has the tall tires and weird rims, and that front rear axle is up close to the door, or where a door would be, leaving room for the tandem out back, something has to go under that long box to hold it up and it sure isn't that axle behind the driver's door

I would think that pushing hard on your brake pedal is asking more of the pump to run the hydoboost, so maybe it's crapping out on you or has a plugged return filter

You can put in most any engine you want as long as it fits in the hole and has a SAE bellhousing on it . There's a Canadian dude on YouTube that shoved a 454 in his truck, there's a couple of other guys on YouTube that have also shoved other engines in their trucks . Midsize trucks like the...

I fired it up and let it run for a bit to get the juices flowing, speaking of which my oil pressure didn't jump staight up with the spin on filter swap like I have heard, it's only slightly quicker . I made a vid of my grandson doing crazy 2 yo stuff while the truck ran in the background .

tie6044 has them, so does jatonka, they are both on here just shoot em a message . I have bought from both . Tie6044 also sells his on Fleabay under same name

This one is thick black plastic, not fiberglass . I have seen many of the glass ones I saved it for years cuz a buddy wanted it, but he sold his Deuce so it's mostly likely going to go DTR .

Here is the only pic I could find of the top in action, I believe it has been molded which is quite the process, it's surprising I can't find any info on this . I even asked Big Mike and he said he'd never seen one like it .

Dont forget your trunion bearings, the fitting is down low in between the front and rear duals where the suspension pivots . They are often overlooked and imo can't be overgreased .

I have this plastic M35 rooftop, I've never seen another like it and I can't find anything in the internet like it . I used it for a moment until I got a metal one, it is quite sturdy, does anyone on here run one of these ? I figure there might be someone on here that remembers when these...

... Man I'm so glad I bought a towbar that fits my Deuce, one of the best Investments I've ever made for that truck . I can pull it with my 5 ton or a dump truck, Semi or whatever, I can pull it with my Superduty if I have to, it weighs well over 8,000 lb . Some might say yeah well the whole...

I also am not understanding your term slipping, those cases either go or they don't, they are straight up Gear Drive . Are you running NWF or ORD kit ? I am questioning the Assembly of those cases, I'm also questioning the internals of that 14 bolt that you just installed, because you...

Saw no reason for the stock configuration to leak, yet they did, not anymore Edit: in hindsight I do not at all care for the shiny aluminum parts on my engine, wish I had painted it first and I shall still, with a little brush, maybe filters too with a spray can 😎

I opened the door and saw a little water on the transmission hump, realized there must be a hole in the roof, went up and sealed it with a dab of silicone . That's what I did last week . Here's what I'm going to be doing, but I don't know what week it will be preferably a warmer week . After...

Your converter lockup switch is malfunctioning, there was a thread on here less than a year ago that a person had the same problem they figured it out, just dig around you'll find it, or you could just search the intardwebs and it'll probably bring you back to that thread on here Good luck newb

Thread necro 💀 😃 🍺