Search results

Jdt Sorry I was not clear the pedal can be pushed to the floor with no back pressure from the hydraulics. The pedal does sring back with the proper movement from the return spring. Cranetruck told me of the bleeder on top of the airpac itself. I will try that now.

Does the master cylinder only feed the airpack and the airpack feed the brakes? If that is true then I'm thinking it has to be some kind of bypassing in the airpack like Jake says.

Used a one gallon pressure tank to fill all the lines and slave cylinders with new dot 3/4 after blowing the system clean with twenty psi air. The Master cylinder was and is topped off. After air pressure comes up you can really stand on the brake pedal and there is no bleed down. Have the...

My M35A2 (77AMGENERAL) when left one or two nights will lose all air pressure. The Brake pedal after the system has bled down will drop to the floorboard when depressed with no resistance. After the truck has started with almost no air showing on the tanks. The Pedal responds after one pump...

I would go to the jail and visit him:!: You could maybe work out a deal. Candies, playboys and beef jerky are worth the title to any ride while in jail. The guy might sell to pay his lawyer fees. Go to the jail it may be the cheapest way.

The story can't end here, more please.

Man up a little... Recoveries and long trips are the best part of the fun. That butterfly that says you may not make it. The determination that says I'm ready for the best and the worst. And you should make it. You don't carry a prescription schedule and reminder pack yet. Your young...

M939 one sold, $7713.00 M915A1 two sold, average cost $4224.50 M35A2 seventy eight sold, average cost $1327.15 M35A2C seven sold, average cost $1342.00 M923A1 two sold, average cost $7531.50 M1031 one sold, cost $227.00 M925 one sold, cost $1147.00 M1008 two sold, average cost...

That Has crossed my mind to get an M818 and pull a camper conversion. Or even for recovery and transport. But I have this big boat that started all of this OD madness and I still need to tow it and have a camper. So back to an M818 and a M109 or M185A2 box. Of course backing a flat bed into a...

Sleepers who lay across beds like you have seem less prone to injury than the ones that crash head first into the forward bulkhead. Like your set up.

Best rig. A nuckle boom and a short drop side bed. Pulling a Box on a long trailer with a porch.:-D

Set up like Vinny no spare tire holder. Maybe an M36A2 with a box and back porch. That would be a great truck. But really, just like the higher highway speed of the M818 and want the box for winter camping. I need to look at my M185A2 and see how far out the box extends from the fram also. I...

Will the Box on the M185 be to long or can I make it work?

Typo M1008 4241/3900 redstone

one M108, sell price $1650.00 two M809, sell average price $4050.00$ twenty eight M818, sell average price $1484.00 twenty one M35a2, sell average price $1646.00 eleven M35a2C, sell average price $1944.54 six M1009, sell average price $1600.00 four M109A3, sell average price $1120.00...

Virgina used to do a waiver also.

Looks like an old CIA plane, of course I'm kidding though.

Have found (3 ) brake line faults and two failures so far and still need to build a pressure bleader. A hand over hand inspection by crawling under a Deuce is the best way to learn what you have and where it connects. Even if you dont understand what you see later it will come to you when...

Look above and behind the drivers tire on the front left truck frame. On the frame you will find stamped in with one inch high stamps the vin for your truck. It should match the number on your dash, of course it may not if parts have been swapped around.

Look under dump trucks on ebay a guy in utah had a gasser I think, looked multi.