• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. P

    Ideas to quite down an mep 005

    Hi guys I’m looking at ways to quiet down my mep005s as much as possible. I use them 24/7 to power my island hotel. Noise at night is a huge problem. I just built a 8ft block sound wall to deflect some of the noise and am Almost finished a block generator building in which all 4 of my 005s...
  2. P

    Who other than delks sells used parts for an mep 005?

    Ok thanks. Now I understand.
  3. P

    Who other than delks sells used parts for an mep 005?

    Hey thanks for the tip on the voltage regulator. The one I found was for the 400hz 005. Still looking for a spare. If I can’t find one I have a friend going to the states in Jan that can take my exciter box to the states to get repaired What does UOC stand for. Thanks so much for all your help!
  4. P

    Who other than delks sells used parts for an mep 005?

    In the parts Tm number 76 is nsn 6110-00-363-3973 or 3974. How do I tell which is the 50/60 hz version. By the usable on code? Where is the key as to which code is which version of the generator? Thanks so much for pointing that out!!!! Is there a separate Tm book for parallel operation or a...
  5. P

    Who other than delks sells used parts for an mep 005?

    Hi guyfang, I just bought another non running 005 and the seller is removing and shipping me all the electrical boxes, transformers, front panel gauges and switches, wiring harnesses, Injection pump, alt, starter, muffler for spares. I also want to repair my exciter box so I have a spare one of...
  6. P

    When starting my 002 the wiring harness from the control panel to switch box melted down from some type of short?

    I can’t get the link to open. I’d like to read it! I’ve had these 002s for 5 years with one running 24/7 and now have two running 24/7. Swapping over to my four new to me 005s. One of them should take care of my electrical needs for a while. I plan to sell my 002s. Just want to repair the one...
  7. P

    Who other than delks sells used parts for an mep 005?

    We after closer examination found that the CR 16 & 17 are damaged. The outer body is cracked an missing almost half of the outer painted area. Do you think that might be the problem? Are they part of the exciter circuitry? What additional testing equipment would I need to test all aspects of the...
  8. P

    Who other than delks sells used parts for an mep 005?

    Anything in particular we should check in the exciter box that is problematic? Thanks again for all your help
  9. P

    Who other than delks sells used parts for an mep 005?

    Hi guy. My error. I thought the status exciter and voltage regulator assm box was the s/p box. The exciter box is the box we installed in another generator that was working properly. When we installed it that unit would not make electricity. We we reinstalled the units exciter box it made...
  10. P

    Who other than delks sells used parts for an mep 005?

    Here is what we did, we put the s/p exciter box into another genset and now it won’t make power-nor excite the generator. We swapped them back and it is making electricity. So the problem is definitely in the s/p relay box. Any idea what in the Box might be the culprit? Thanks so much for your...
  11. P

    Who other than delks sells used parts for an mep 005?

    We put 24 volts to the exciter circuit today and the generator made 220volts. So the generator is good we aren’t getting 24 volts to the exciter where the two exciter wires go into the two wire bulkhead connector just above the generator head we have the box out and have inspected it...
  12. P

    When starting my 002 the wiring harness from the control panel to switch box melted down from some type of short?

    The only reason I have to change the control box side of the cable is because the backlite separator inside the female half of the connector is fried. It looks like a fun job. I had to gut my old ac box just to remove the female plug and cable !
  13. P

    When starting my 002 the wiring harness from the control panel to switch box melted down from some type of short?

    The ac box looks perfect. The cables inside the box look perfect also. The ac box is a fresh rebuilt from the military, I bought two of them. I will take some pics in the am. It looks isolated to the plug and the first six or seven inches of the control box side of the cable.
  14. P

    Who other than delks sells used parts for an mep 005?

    How many lots should the start switch send to excite the generator 24 volts? Or less. ? Thanks
  15. P

    Who other than delks sells used parts for an mep 005?

    Hi guyfang, I read the Tm. The current transformer number 40 with the single hole in it only comes into play during parallel operation evidently. I repaired the three mouse chewed cables in the unit I took the transformer out of to put in the unit not making power. Still not making power. My...
  16. P

    When starting my 002 the wiring harness from the control panel to switch box melted down from some type of short?

    On start up. I checked the bolt grounding the battery to chassis ground and it’s good and tight. Don’t see any damage other than the cable! This thing is 38 years old. So maybe the plug founded itself and fried the cable.
  17. P

    Who other than delks sells used parts for an mep 005?

    Wow this is really weird. The other mep 005 that came with my rowpu only has a few hours on it since the engine was rebuilt and the rowpu was serviced. The genset makes stable power and all the gauges seems to work but not sure on percentage of load guage as I haven’t run a load on it. I think...
  18. P

    Who other than delks sells used parts for an mep 005?

    Sorry tool so long to reply. Yes. It’s number 40 on page number 84 The number I posted is the number in the outside of the transformer itself I just got my parts Manual and see the NSN part number system Guyfang. I dont have much skill in electrical diagnostics and do not know how to read...
  19. P

    When starting my 002 the wiring harness from the control panel to switch box melted down from some type of short?

    I live on an island and they have been running 24/7 most of the time. A couple months back I had a problem with the 1 phase 3 phase switch so I bought a pair of government rebuilt switch boxes. I installed one on this unit and it was running fine. No on rodent damage. I have 3 mep 002s. And two...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks