Search results

Well, got some simple fixes done to the deuce. 1. Drive link bolts between the transfer and transmission were lose. Put the TC in nertural, used 2 wrenchs 3/4" tightened it up. 2. Transmission filled to hole, drained, and refilled to one kuncle. FYI a 1/2 breaker bar non racheting wrench works...

So after 2 hours of pressure washing, 3 bottles of tire shine, and a can of igh temp black grill spray paint. I have the look I like. I know CARC is supposed to fade and don't like it. Truck need sand blasting and paint still, but i happy with what i have.

Just wanted to share a driving habit I am starting to use more and more. When backing down hills or long drive ways i put the deuce in low range. Let the clutch out and let the truck move slowy. This keep it moving so i can steer and keeps me from having to apply the brakes. Any one else find...

So i am sure this has been covered before. Read the tm and understand where to place the solar panel and how to hook up the wires. My question is where do i mount the little black box. Here is the picture of the box. I have the solar panel. This is all the hardware i have, hope i not missing...

Waiting on my Dad and Joel to show up a my house to start the front axle seal repair. Hopefully they will be here soon. I will post as many pictures as i can. Post some questions while working if we get stuck.

Here my problem guys. Pulled the primary filter houseing below the alternator and found the filter i bought is not what's in the truck. Just came from GL. Now the filter in there looks similiar to filter #1 smaller hole on top and bottom but has a fine paper around it. Where can i get the...

Every time it rains my truck CARC Chemical Agent Resitant Coating looks great. I mean it makes the truck look new. Now when it drys up the paint looks faded. Any there any way of keeping the paint saturated to keep this apperance? Maybe a clear coat?

We'll guys my duece down right now. After playing in the snow last month, I developed a gear oil leak. Its on the passager side front axle. After some research I have concluded its the inter axle seal. I went ahead and ordered all new seal ands boots (no zipper, silcon yellow) for the entire...

Finally got off work on time before the sun went down. Been waiting all week to install my frp troop seats. They have been sitting in the back of my truck since Sunday morning. The ones that came with the truck were wood, missing hignes, and not worth fixing. Headack rack, left side, and right...

Just got another GL Hold email. Glad i have my truck Dear Valued Customer, The DRMS has just notified Government Liquidation that select vehicles sold through Government Liquidation auctions are currently on hold until an inspection of each vehicle has been conducted. A list of affected...

I spotted this on I75 north in Marietta. Nice 5 ton Dump Truck. Any ones here? Look nice, would have gone 3 color camo myself.

Well I let the canister turn during installation. After relizing there error i removed the canister and found the washer was stuck on the spring(not good). Bought another canister with a newer style washer and spring so i won't make the same mistake twice. Here are some photo's

Was in Tenn. and descided to go by Frankfort to look at my M35A2 W/W. Here is what I found in the 20 minutes i was allowed to view the truck. 1. screw in the back left tire i will need to remove or leave.2 2. Truck started i pulled onto the roadway and did a brake test...half pedal full stop...

Just got an email....What's going on? Dear Valued Customer, The DRMS has just notified Government Liquidation that select vehicles sold through Government Liquidation auctions are currently on hold until an inspection of each vehicle has been conducted. A list of affected vehicles is...

Just won my first Deuce on GL. Looking foward to picking it up(EUC pending). I was so exicted last night i could not sleep. Hope she is ready for the trip home. Its going to be an adventure. I am activatly looking for any heading to Frankfort for a pickup please PM me. M35A2 W/W