Search results

Ok, I just started it up it idled for about 5 min at 1300 rpm, I cant get it to idle lower, if I snap the gas peddle it just keeps climbing up and I have to kill the motor to keep it from red lining

And that fule cut off lever keeps wanting to stick I sprayed some lube in there, any other Suggestions?

Ok sprayed starting fluid and it fired off, ya!, had a high idle then gave little gas and the idle went high, where can I adjust the idle? Is it on the lever under the gas shut off rod?

Ok I pulled the fuel shut off cover the arm look to be in the wrong spot put a little oil on it oil on it and moved it back and forth, it looks like it sits in the 6 o'clock possistion and then 4 o'clock when pulled off and it will now spring back to 6, I pulled off one injector line an cranked...

Been working on this all day, I replaced my motor today got in , and went to bleed the fuel lines to start it, I got fuel up to the HH to check that I pulled the bolt in the middle of the 6 injector on top of the hydraulic head turned on fuel pump good there, then cracked loose the injector...

i pulled the HH and it was the button that fell off put it all back together runs great

Sweet thanks I'll let you know tomorrow how it comes out

So do I put the motor at tdc and pull the fuel lines, then take off the 4 bolts on the hh and pull it out to fix the button ?

I pulled the line after the 2 filters that goes in to the injector pump and gas flowers great out of it, then I pulled a line off the injector and cranked and no gas came out, then pulled one line off th hh and no gas came out when cranking the motor

Yep I pull it to the fire wall and it springs back to the 7 o'clock position, any other idea?

Took out the bolt and gas came out when I turned on the elect.switch, then cranked it and the plunger went up and down, sound normal?

Yep it moves freely,still not pumping

Yes it dose,and the truck runs off starting fluid ,can that injector pump be rebuilt? Or is there something I can do with it in the truck to get it pumping agin?

Sorry I ment diesel, fuel ect...

It has gas through the filter and its a nice stream, but no fuel at the injector, theres a box next to the frame rail with 6 gas lines going from it to the injectors,the gas is not making it out on that box, it says Bosch on it

i am new to owning this m35a2 i have had it for 2 months now, it always starts, i went out this morning to move it and it would crank over and you can hear the fuel pump on,but wont start, any quick ideas i can look for? thanks

I got a m35a2 and I need small parts here and there just seeing if any one knows of a good salvage yard or parts places in southern California /San Diego area,thanks

Adam / LAKESIDE California

JB weld won't do good I've been there and done that, it's a quick fix to get you by for a weekend, there's a place called aluminum brazing company, they make a basic rod you can do in your car, drain your coolant clean with water and wire brush, all you need is a map gas torch you can get at...