Search results

Should be but Ah, that's kind of a temp mount. You might also check the ground connection. Not seeing what going on that could also be a contributing factor.

It might be over pressuring the float valve. Research the pump pressure and if it's above 3-5psi then install a pressure regulator. Also, it's best to rewire so the pump is energized when the oil pressure is present. I have a switch to manual prime to help when changing filters or needing to...

Oil filter

Well have a great time with it!

I think the 1st phase for transport to his location.

By the specs 35.2" (+-)

No, not yet. I still have plenty more to do before that. I have seen those size tires on an M37 and that's what I have as a 'must do'.

So true. I'm researching this same topic which is how I came up with the 315. I also found another tire but you loose even more OD (~2"): 255/85R16 @ 33.1" (6.5" min rim recommended) vs 315/75R16 @ 34.6" (7.5" min rim recommended)

Minimum recommendation is 7.5". I've seen them on the 6.5" and they are not pinched. Being on a smaller rim is safer than too wide a rim where you can get bead separation (unless inflating high PSI). High PSI has its own issues. Granted that you will need to run the PSI as to not roll the...

The best I've found is 315/75R16 Looks good on the standard rim, not pinched.

So, what was "a good thing"... The truck or the wife?!?