• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. cjtroutt

    MRAP wheels and tires on a deuce?

    Call ouverson engineering they made a set in 10 bolt hub for an member hear that fit 2.5 ton axles and ditto to Bob H what he said.
  2. cjtroutt

    cucv injector socket source

    Yes it is and it finish is smooth because it is Black Cadmium coating. just some tools have differnt finish and if you left out it will rust. I bought this one from Carquest.
  3. cjtroutt

    cucv injector socket source

    Here is the photo of mod 30 mm inpact socket and works very well.
  4. cjtroutt

    cucv injector socket source

    I bought an Inpact socket and put a bolt in the ratchet hole and and chuck it up in drill press and used 36grit flap wheel in my angle grinder and thrned on the Drill press and turn down the socket so it fit over the injector. $18.00 socket. Or $40ish to 60ish. I take a photo of and post it...
  5. cjtroutt

    My first heartbreak...

    Thoes parts are not that bad if you rebuild what you have done alot of them.
  6. cjtroutt

    I need your opinions

    That light will look Very good in that bumper.
  7. cjtroutt

    What did you do to your deuce this week?

    Fix all my engine oil leaks.
  8. cjtroutt

    yet another GP No start fault

    Ditto to Doghead Ditto.
  9. cjtroutt

    Multi's Valve Adjustment.....

    Great info thank you.
  10. cjtroutt

    5-tons & Weigh Stations

    I never stop when I drove LET system M916A3 and M870A3
  11. cjtroutt

    tip for starting diesel even though you have total glow plug failure.

    I droped some rubbing achol down in the air intake on cucv and it fire up ok with out damage to the engine.
  12. cjtroutt

    Diesel in Truck Bed

    :ditto:That is right you hit the nail right on the head :ditto:
  13. cjtroutt

    Here My Bobber Bed from scrach.

    Ditto maddawg308 Ditto And now we the MV owners Build them all the time to Be an custom models. 1. XM381 prodotype 2. XM381A1 STD CAB soft top 3. XM381A2 STD CAB Hard top 900-20 or 1100-20 14.50R20 4. XM381A3 Extended Cab 900-20 or 1100-20 14.50R20 395-85R20 5. XM381A4FCCEX EXC and the all...
  14. cjtroutt

    M Series Door Latch Repair

    Thank you Tom for the info got it done other day and made me feel alot better to open my door with out leaving the window down.
  15. cjtroutt

    6 bolt to 10 Bolt wheel adapters

    Wow that is no fun at all well hope it gets better soon for you to work on your old MV. Keep us up dated when you get time.
  16. cjtroutt

    Deuce Oil pressure troubles

    Well it was done by the military under Maint and I dont see the sending unit in brass I worked around Heavy Equipment and never seen brass on Hyd lines or water lines to or fuel but old verses new tech. when I was younger I had a water line brake on me on 85 w900 Kenworth and it was short and...
  17. cjtroutt

    Michigan MVPA Show and Swap Meet 6/11

    No fuel is high and family poopo to do or I just leave and dont say where I going to and become a photo on a milk carton.
  18. cjtroutt

    Michigan MVPA Show and Swap Meet 6/11

    I have other stuff going on.
  19. cjtroutt

    Michigan MVPA Show and Swap Meet 6/11

    I dont know that I can make it yet Looks grim.
  20. cjtroutt

    I can finally post pics! Epic Deuce.

    Nice job on up grades. what sound deadner did you use.
Top