Search results

Last winter I bought a 2010 VSE rebuilt Hmmwv to make a nice driver. I was just planning to do a 4 door soft top with x-doors but that's when everything went wrong. I decided that I had to have a turret. Almost everything else I've had in the last few years has had one (M931a2, M923a2) so why...

Got a M998 out of MN.

http://miscpartsmanuals2.tpub.com/TM-9-2320-387-24P/TM-9-2320-387-24P0612.htm Part #15 5330011978298 ORD-112 http://www.ebay.com/itm/NOS-Humvee-HMMWV-Seal-Cargo-Shell-12339594-5583166-5330PL0804794-5330011978298-/121802291952?hash=item1c5bfb7af0:g:VCcAAOSwo6lWM~yb

Talk to Alan (postman515) He has the new set up. http://www.steelsoldiers.com/showthread.php?157836-NOS-M915-Series-Alternators-With-LED-Voltage-Regulator

http://www.theballybomber.com/photos.html

Here is a picture I've had.

Nice looking truck!

I brought my truck down to participate in the ceremony honoring Purple Heart Medal recipients Friday in Woodstock IL.

If it looks bad now is the time to do it. you will have to pull off the top to do it later. How are your sponson gaskets?TM#26 Part#12339619-1. Also do you have the spacer sleeves that the bolt for sponsons go through?TM#25 #5583156 When you bolt on the bracket that holds the lower gas strut I...

Yep Action is right. The upper windshield seal is riveted down with a thin metal strip.

I almost done putting mine together. I did windshield frame, rear sponson, then C pillar with other sponson. Leave loose so you can install the hatch next. Next I did turret support and B pillar tubes. Roof went on next. Take your time and align everything up and start bolting it together. There...

Do you have the part number you need?

Will be there on Thursday. Bringing lots of good stuff for the swap meet.

RG31 looks good on a 5 ton.

That is a friends truck.

Here is some pic's

Look at the outer ends.

See above post #21

The aluminum ones I've seen didn't have the shackles out on the ends of the bumper.

The coupula may fit but you will have to make all new mounts. I tried one on a M1025/ LWS on Saturday. It's set up for the heavy turret bearing with the flat upper plate. Like Pic #1 you can see where the green paint is that's how it mounted. Pic #2 shows LWS/ M1025 light weapons bearing and...