Search results

Unforgiven there is one in the classifieds, I got mine from if I remember right Barstow equipment. Vaughn

No I didnt even know they did that because we drove 3 of the 4 off the base last summer thats to bad. Im in Riverton if you need any help with your truck let me know if I can be of any help. Vaughn

I was not aware that they had changed, the last few items we have gotten all fit in our trucks. What part of Utah are you in? Vaughn

Some buddies and I pulled 4 off Hill AFB last summer 3 drove out, 1 needed towed its just how it goes. DO read the manuals. Welcome to another Utah member. Vaughn

I would agree to turning up the fuel but dont forget the pyro,Id hate for the next post to read how much for a new motor. Vaughn

I would agree with turning up the fuel but be sure to install a pyro. I'd hate to have your next question how much is a new motor. Vaughn

As stated above make sure to set the wheel up un something to allow the tire to be free from the ground (I used a 5 gal. bucket) then I set the ring on and stomped on it and used a tire hammer to make sure it was seated then ran some chains through it and got away from it and aired them up no...

Speddmon I see where you are coming from, I run the main service through the switch and then I manage the load by what is turned on in the house or shop. Vaughn

Just to let you know that if you have a 200 amp service you need to use a 200a transfer switch because when you are not running on the gen your transfer switch will be taking the full load of the main service through it. I chose to use the pin and sleeve because it is supported by the housing of...

I have been hooking up these gens for friends and on the mep 003 i use the 6-4 so. I also use leviton 4 wire 50amp pin and sleeve cord end and receptiicle in the transfer switch so its easily connected and disconnected. Vaughn

As a high school teacher I totally agree with how inept the kids today are I think my 6yr old son is more mechanically inclined than these high school kids. I can tell my son the size wrench I need and he can go to the shop and get it crawl under the truck with me and help hold the bolt and he...

Thanks guys for the ideas. I did find one at napa.

I have a leak in my coolant system and I'm looking for a radiator cap adaptor for a pressure tester so I can locate the leek. If anyone knows where I can find one it would be helpfull thanks in advance. Vaughn

Id be down for one I think they look good.

That is a sweet looking unit I think I wil have to do the same thing then I can put christmas lights on it and drive around.[thumbzup]

I second take a little time on that heater it will be well worth it. We have four of them between my friends and I and there is nothing like the heat they put out. We have had some problems but nothing to bad. My buddy had one leaking bad and Im tryig to get ahold of him to find out what the...

Back in the summer i also put on the spin on adaptors. After installing I started the truck and and no leaks Then I took it on a little drive to go get a burger when I got home it was leaking. I removed everything and retightend and it has been leak free ever since even when we got into the...

Ok thought my computer was having prob. Sorry I mispelled HEMTT.

I can only see one pic. Recovery how did you get the mtvr pic?

That vehicle would be a hemmt.