• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Overboard

    Transmission trouble

    Well it didnt get to a TCM swap i don't know what i did wrong when i checked the light, but when this first started i order a relay and a trans light, they got here last night, before trying a TCM swap i replaced both and the light is out, so i swapped out the relay with the old one and the...
  2. Overboard

    Transmission trouble

    Ok the 1097a2 is a 95 and the 1045a2 is a 05 so if i swap out the entire box and still get light we can rule out TCM and the light did same dim i also checked the light itself fed it steady 12 right off battery and checked for continuity in case the light itself was messed up.
  3. Overboard

    Transmission trouble

    I got two brand new batteries I know they are good and I swapped out the light, Could I swap a TCM from a 1097a2 to this truck to rule it out both have non-turbo 6.5 4speed transmission?
  4. Overboard

    Transmission trouble

    I have .048 volts coming off the 657a body side while running, I'm assuming this is the TCM then?
  5. Overboard

    foaming power steering fluid and hard to steer

    The quick disconnect on the fan clutch was leaking replaced the o-ring bleed the system will find out if it comes back but good so far thanks again
  6. Overboard

    Transmission trouble

    Ok so as far as continuity it's no, yes, no And voltage on 657a is 0 off .018 at run and 10.17 engine running No crimped wires or anything and plug to tcm looks good I also tested voltage off of 657b and I got 0 then 12 on run and running I'm getting 11 volts
  7. Overboard

    Transmission trouble

    Thank you gonna try that today will post results
  8. Overboard

    M1025A2 Question

    I didn't purchase an eastern unit i went the gov planet route, I have purchased parts from eastern but mainly bc i live in PA and i avoid shipping by picking it up. Either way you pulled the trigger you now own a HMMWV, enjoy it. Start looking around for parts, there are plenty of places to...
  9. Overboard

    foaming power steering fluid and hard to steer

    Will do thanks
  10. Overboard

    Transmission trouble

    Yes I unplugged it inspected the pins everything looks great, i don't know if another TCM would be the solution, only bc the one that is in it looks brand new. i just got done with the reverse switch. I went over all the wiring took the light out tested for bad grounds and everything looks...
  11. Overboard

    Transmission trouble

    Bone dry
  12. Overboard

    Transmission trouble

    Tomorrow I will be installing the reverse switch so I'll be in the neighbor hood and I'll look at all the wiring for the light hopefully it's that, possible a bad ground.
  13. Overboard

    foaming power steering fluid and hard to steer

    Hey know this is an old thread but why not I have a pump (old style) whines like crazy I blead the system exactly per TM and it's good to go not a peep, then a week or two later I'll take it out and we're right back. To whining, is this a pump issue, hydro boost, or something else
  14. Overboard

    Transmission trouble

    I was able to get it out and took the risk I got it up to 50 now I fist went through 1 to 2 to d to OD all went great no problems at all reached all four gears in OD and felt torque conveyer lock up I checked the red button it's not popped meaning pressing it did nothing, no movement, as for...
  15. Overboard

    Transmission trouble

    I have an m1045A2 (planetgov) and ever since I got it the trans light stays on. The light comes on as soon as I turn power on crank it up, until I turn the truck off. I used the diagnostic approach, jumped A and E, this is where it gets really frustrating it just flashes 12 over and over, no...
  16. Overboard

    Hmmwv springs

    Nice truck, besides the obvious visual of sagging springs is there a measurement i can take to determine that they are good or on their way out?
  17. Overboard

    Hmmwv springs

    I'm sure it doesn't matter but neither truck has turbo, is there a measurement I can take to check springs?
  18. Overboard

    Hmmwv springs

    I have a 1097a2 and a 1045a2 the 1097 being the former up armored, I was toying with the idea of puting the slantback on the 1097a2 just for reasons that it's in better shape and street legal, however with the height difference would it make it more of a rollover risk being top heavy.
  19. Overboard

    Hmmwv springs

    I have a former up armored humvee that sits higher (2 inches in the front) than a non armored hmmwv, is this a normal thing? I would assume that they would put bigger springs on the armored bc of weight.
  20. Overboard

    Slant back c pillar measurements

    Just to close the thread out i did get a hold of him. the quality is indeed excellent and was a pleasure to work with.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks