Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Why not go all the way and once installing the new lens/reflectors, then put in the H4 HID kit? They are readily available on flea-bay and most are 24V compatible, just confirm in the fine print first. The standard 35W H4 HID out shine 75W or even 100W halogen lamps and use a lot less power...
Solargizer Mounting
I put my solargizer panel on top of the hardtop cab, passenger rear corner and dressed the cable inside mesh sleeving down the back of the cab. I used RTV (silicone sealer) to attach the panel without drilling holes and to also anchor the sleeving to the outside back cab...
Yes, the measured pressure is the regulator output. If you pull out the hex setscrew used as a plug , you can see the passage to the output port. There is a similar screw on the opposite side of the reg that also taps the output port. I was originally concerned that one side measured input...
Aw righty - here's the requested pix.
The first shows the new reg with schrader installed and capped.
The second shows the Napa schrader package.
Enjoy! (BTW - I set my PS system pressure to 60psi).
Truck Name
My son named my '82 Chevy K10 4x4 w/6.2L Diesel "Big Stinky" back in '96 when he was 2! It was an appropriate name and 15 years later we all still call it that. Now that we have a M35A3, we call it "Bigger Stinky" and if I get an M809, I've already decided it will be "Biggest Stinky".
Paint color please?
The discussion over the last 24hrs has all been great debate, but back to my original question - what is the semi-gloss paint color and a source for a match (like a rattle can)?
Thanks!
I'll snap some tomorrow and post.
Hope folks find helpful. This is my attempt to 'give back' since I've found so much useful information at this site that helped me learn and repair/avoid issues.
My '95 A3 has what I believe to be the original Cat 3116 in it. The engine's original Cat paper inventory stickers are on the block, the computer printed engine data sticker is on the top of the valve cover (and its number matches the block inventory number), so nobody has repainted the engine...
I'm passing this on because I see threads for the A3 regarding both air leaks and PS issues.
I noticed the air dryer cycling fairly rapidly and the gauge pressure dropping on my A3 when just sitting and idling. Since there aren't many other items that consume significant air aside from brakes...
Thanks Carnac for the info. At risk of over-tapping the well, I searched the web for info on the 489th support Bn and really can't find anything relating to that specific organization. I'm trying to find out who B Co, 489th Support Battalion is attached to at the brigade, infantry, division...
I have seen them listed in some GL lots, but then you have to buy a few pallets of other junk just to get one or two bulbs which may still be no good. After searching for another source & cross to a common lamp and getting the detailed specs for this lamp, I realized that it was likely only W-A...
As I promised, here's the source I found for a replacement 998601-1 bulb for the M35A3 BO headlight:
Original Mfg: Welch-Allyn
Price: $32.59 + Shipping & Tax
Phone: 315-685-4172
email contact: killmored@welchallyn.com
They were very prompt in responding and providing price/ordering...
Could you please look up the previous assignment and reg number for my M35A3 WOW?
The engine shows 1993 mfg date
NSN: 2320013832047
VIN: 500628
Reg: Unknown
All other numbers have been painted over.
** I bought from private party, but the SF-67 is from GL in Arizona.
Thanks in advance. I'll...
Replacing the big black filter filter alone won't put the air dryer back in proper operation. The dessicant cartridge must also be replaced since this is the actual element doing the 'drying'.
Anyone who doesn't drain their tanks regularly is just looking for trouble later. Those 14000lb...
It is supposed to replaced yearly (if you use it in daily service). The mil units get pretty scummy because of infrequent use. The unit is a Haldex "Pure Air Plus" used in many commercial air brake systems. The complete dryer PM package is kit DQ6026 and is available at discount from Ryder...
Oops - I didn't format the NSN properly - My bad.
Here it is again:
Could you please look up the previous assignment and reg number for my M35A3 WOW?
The engine shows 1993 mfg date
The NSN on the dash is 2320013832047
The VIN is 500628 from dash plate & frame
All other numbers have been...
Could you please look up the previous assignment and reg number for my M35A3 WOW?
The engine shows 1993 mfg date
The NSN on the dash is 2320-01-383-2047
The VIN is 500628 from dash plate & frame
All other numbers have been painted over.
Thanks in advance. I'll follow your donation policy as...
This is a Halogen specialty bulb
This bulb is made by Welch Allyn, which also makes the lights that doctors use to look in your ears, etc. Their P/N is 998601-1. I too have an A3 with the BO headlight out. There is no other source that I have been able to find for this lamp. It is a 19 watt...