Search results

Mine were on the bottom and I flipped them for better lighting. Recently I bought a set of 7" round lights that take a H4 bulb. The difference was so great I returned the headlights to thier original position. ~ Pappa-G [2cents]

For your wiper arms go to napa and get part number 60-750, it has a new arm and adapter for modern (read as: working) wiperblades. The kit cost @ $16.00 +/- for each arm. Best of luck with the DUCE Fred! [thumbzup] ~Pappa-G

Well it looks like I'll swap the drivers side with the passengers, I dont look out that side anyhow.~ Pappa-G :idea:

Is the wiper travel adjustable? The pass side sweeps the complete window while the driver side is a short stroke. Am I ate up with the dumbasse or what? :banghead: :banghead: :banghead: :banghead: :banghead: :banghead: :confused: ~ Pappa-G

Disconnect the pipe at the joint above the heat shield and take a grinder to the flange welds reweld the flange to a section of 3" ID pipe ( I used a 5' section to get above the box on mine) throw a rain cap on ($7.50 at the local farm store, get the 3.5" one.) bada bing you is dun!! For more...

:confused: I've been searching for a couple of days now but I cant seem to find it. Does anyone know the TM# that covers split rims?? :confused: Thanks ~ Pappa-G

You might also want to have a bad vacume leak so every one thinks you're running a whistler turbo!! [^] :lol: :lol: ~Pappa-G

I lay mine in the nightstand, not in the driveway :confused: [^] :rolleyes: :rolleyes: :rolleyes: :rolleyes: (see thread title)~Pappa-G

As far as I know only the turbo is different. The C is refered to as a "whistler" and they do.The D is supposed to make a little more power though. [2cents] ~Pappa-G

I talked to Chip today, he seems like a nice guy. Thay have the contract to getrid of the military tires (they are paid to take them) then they sell them. Call him Chip the Wiley Coyote- Super Genius. Good work if you can find it!! I ordered some 11.00Rx20's today should be here by Thurs., I'll...

I own a DUCE. I have owned a M715 and a load of flat fender jeeps. I have wrenched on fighter jets, trainers and cargo pigs. Currently I work on OH-58's helos. As for the BEST I would say in the fixed wing catagory C47 Dakota. With a C130 Hercules a very close second. Rotery wing would have to...

Check to see if you have 24 v at the alternator when the ignition is on( at the smaller wire ). I picked up a M35 and its alternator was wired wrong. Check the schematic in the Technical Manual. Don't fill the battery to the top and then charge it up. Just fill to the top of the plates and...

Mcinfantry that looks soooo cool - YOU are my HERO :yeah: :yeah: :yeah:

Be sure to check the regular stuff. Be sure the oil pressure is good, the manuals call for a minimum of 10lbs at idle. when the motor is warm. You'll have to cover the radiator with card board or some thing to get it up to 190 deg..This way you can be sure the temp gage is working along with...

[dito] Synthetic grease is super but expensive, GAA works and is cheap like me! Need I say more? ~Pappa-g

Back in the day when I would take every 4X4 I had into water to see if it would sink or swim, we'd replace the vents with nipples and attach a teed hose to them and run that up high in the cab somewhere. Some guys even would put 1-2 lbs of positive air preasurre in to keep the water out. It all...

Thats all there is. No need to remove the housings or lines. I helped out my brother with fuel filters today. His was filled with rust/gunk and required some cleaning, the other two were fine. We were able to get to his without moving the alt.. The filter numbers are for NAPA Gold Qty - 1...

Riddle me this, can you run 11.00R x 20 duals? :confused: