Search results

You should be able to run what ever lines as long as its not f- heads

Yea i was pretty happy that was all it was. There was a pretty big fire. Most of what went up in flames was the rubber. It was such a pain just getting to that part of the harness I am not going to trace it out. It would not be worth it. What would be the best way to fix the "Y" set up? heat...

18L x 8W x 15H Also i messed up a little and the batteries hit the wing nut. So i took the latches off the plastic box and mounted them to the metal one. Here are the finished product. - paint

Here is the culprit. The metal clamp above the steering column. It looks like it chafed for a while and finally grounded out. So i was able to get the tape off and dig in. This wire was pulled out from a big glob of rubber. I am guessing they did this as protection for the "Y" splice. No idea...

I'm running 6.5 injectors with 6.2 injector lines. Maxed put pump, and full banks kit. My truck runs great. So you can mix and match a lot of parts.

lol. Until I read the manuals and talked to the "experts" like you, warthog, and Recovery. Good thing I go to both family reunions. I think I'm gonna undo the harness and see whats going on in there, Repair as needed to buy me some time and then look for a new harness

Had some problems with the deuce today. Went to get a vin check and when I came home I was testing all of the lights. Then I hit the high beam switch sparks started flying by the switch then the wires above the steering wheel started to catch fire. I did some good damage. I was able to put it...

yep drilled a 3/8 hole in each corner.

It looks a million times better with it painted. I was having a hard time with the seam sealer. It was coming out hard so it made a mess. No big deal its not a show queen. I flipped the box upside down cut out the bottom but left a lip for the new steal to sit on. Then welded it in. I believe it...

1031s have been bringing in a lot of money. If it is rust free it sounds like a decent deal. Try to knock him down. Parts are a dime a dozen for those trucks. so the missing stuff is easy to find.

........

my battery box was rusted through so i decided to patch it up because i did not like the plastic box i just got. I re-skined the bottom and added uni strut on the bottom to make my clamps. Pictures explain everything. Then mounted a ammo can for my center console.

Neither for those prices

Welcome.... Btw we like pictures

Where do you come up with this stuff???

photos

There was a post a while back about pipe cleaner looking wire brushes. Also that is a common fuse that gives people problems. On mine I had to add solder to it so it would make a tight contact.

just picked up the deuce today. The heater push pull buttons are frozen. Any one know how to unfreeze? In the mean time I will be reading the manuals

Looking for a complete winch set up for a m35a2

picking up my first deuce this saturday. We will be trailering it home with a 3 axle trailer and a flatbed duramax. It is a very clean m35a2c wo/w (flatbed no sides). picking it up from Maine 285 miles each way. won last week on GSA. pictures to come