• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m139h2otruck

    Where can I find New sparkplugs for the R6602 Gasser?

    Looked up invoice for plugs, October 2005, Champion CHP 517 @ $13.01 each. Not sure if number is the store's stock # or Champion's. If you can get hold of a Champion catalog and look up the shielded plugs in the back, there are a number of different heat ranges available. We used a hotter...
  2. m139h2otruck

    5 Micron Stealth Spin on Oil Filters Upgrade

    Looks just like a bigger version of a Mopar slant six filter base! As a side note, the Mack engine in the new 5 ton tractor uses the same filter element as the multi, but only one. In the base, at the oil port from the pump, is a spring loaded one-way valve that keeps the filter can mostly...
  3. m139h2otruck

    Combat Rims

    Still looking! Thanks
  4. m139h2otruck

    Several Bridge Truck Questions

    Here is a couple of pictures of our M812A1's data plate. Note that it says chassis and manufacturer is ConDec! No where on truck does is say AMG.
  5. m139h2otruck

    Bang in reverse

    Should cause no problems, but be aware, it is real heavy.
  6. m139h2otruck

    Where can I find New sparkplugs for the R6602 Gasser?

    Most large auto-truck supply houses should be able to get the Champion plugs. I got mine from a local supply house that had them in stock.
  7. m139h2otruck

    Transmission top removal

    Gasket must be broken in one place, as it runs out good when driving. Oil it Sam's club 85-90 and about 0.5" down from fill hole. Looks like leak has ben ongoing for a while.
  8. m139h2otruck

    Transmission top removal

    Can the top of the 5 ton transmission (part with all the shift rails and forks) be removed while the trans is still in the truck? The new tractor has a bad leak on the back at the top to case joint and it would be great if the top could come off while in the truck so I could cleanup and use RTV...
  9. m139h2otruck

    20 x ? wheels for 52" Michelins?

    OSO, thanks, but the left coast is a little too far for a quick trip, and the freight costs on 6-10 rims would be more than the cost of the rims! Hope I answered your stud question in the 5 ton forum.
  10. m139h2otruck

    Bridge truck owners ! front wheel studs

    Also, you are going to have to remove the hub to change out the broken stud. It is the stud and not the cap/nut/stud that holds the spacer on, right?
  11. m139h2otruck

    Bridge truck owners ! front wheel studs

    Memphis Equipment!! Had the rear studs when I flipped the hubs and messed up one of the extra long studs on the left rear.
  12. m139h2otruck

    Need Help with Leak, Early Style 5 Ton Power Steering.

    From looking at the parts blowup in Memphis' book, I would guess that the unit has an internal leak between the hydraulic cylinder and the gear box. The gear box is filled with gear oil and the cylinder and control valve is pressurized by the steering pump.
  13. m139h2otruck

    Bang in reverse

    Same problem we were having with our truck. Make sure all air lines and valves are tight and not leaking air. I flushed out the case with a mixture of fuel oil, ATF and motor oil. As DDoyle said, bad things can happen quick and you will be installing a new transfer case. Ours does not do...
  14. m139h2otruck

    R6602 cooling system

    When we were first working on the water truck, the temp gage won't read at all, after idling for over an hour with the rad covered with cardboard. Finally took the t-stat housing apart, and no thermostats at all!! Ordered and installed the standard units (160 degree) and now the temp gage was...
  15. m139h2otruck

    20 x ? wheels for 52" Michelins?

    OSO, where did you get the wheels? Looking to do the same thing, but can't find rims, without spending huge monies on either freight or initial cost.
  16. m139h2otruck

    Project in progress / Brush Fire Truck / lots of pics added

    Was this truck a converted gasser? The reason I ask is the de-gasser cable on the photos of the dash. What year is truck, if you know? I agree, the new style steering is a lot nicer on the driver than the old. Our H2O truck has the old style, and it seems to fight you a little at low speeds...
  17. m139h2otruck

    Muffler Modification.

    Your story about the loose baffles reminded me of the old Michigan loader my old employer had. It used a 4-71 GMC (Jimmy) engine and would go through mufflers in no time. Our old mechanic got sick of changing them out so he just welded up a hollow shell out of old pipe and 1/4" plate and...
  18. m139h2otruck

    Combat Rims

    Have an ad in the "want" classifieds for at least 6 of the combat style rims (10" wide, 10 hole). Anyone have the off-set dimensions for these? Also, I can use the older style rims that used tubes if anyone has these. Want to take the spacers off the front of the water truck and run 1400...
  19. m139h2otruck

    Rod bearings, failure mode

    For the cost of a pan gasket, I would strongly suggest that you pull the pan down and remove #6 rod bearing for inspection. I have experienced a number of rod bearing failures, and it almost always causes some amount of damage to the crank by the time you catch it (this in gas motors). Are the...
  20. m139h2otruck

    Transfer Case Jumping out of High

    jwaller: Did you ever determine why the shifter was jumping out of gear?
Top