-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
A
LMTV Frame twist
Rigid mounts in back, spring mounts in front, with some rubber pads. -
A
So the MTVR adventure begins
Cleaned up the TIM and ensured it was getting power but still not detected so it's fried. Will try to find someone with a working one. As I'm going through the truck, I'm really impressed with the engineering (well except for the location and weatherproofing of the TIM :). Glad I caught this... -
A
So the MTVR adventure begins
No concern. Probably traveling at 55mph or so, and if I was concerned about mpg....I picked the wrong damn truck. I'm all about improving mpg where I can, and on my MTV I went with eco hubs to improve mpg and top speed (it was limited to high 50 or so). This one I want to retain the hub... -
A
Is this vehicle dependable? I need advise
I think it might be a case of "my tank has a gvwr of 25,999 so I'm legal!" (Which I support) -
A
So the MTVR adventure begins
Started looking into a few of the issues, found out the solenoid is shorted (#3 corresponds to the front diff) and its the topmost one in the manifold. I did a quick search and don't see many of these availible...it looks like a regular automation component so hopefully there is some cross... -
A
So the MTVR adventure begins
Cat ET, Dana CTIS, Allison Doc are what's shown here. -
A
Is this vehicle dependable? I need advise
CDL is required in many states over 26k, WI for example. Although mine is registered as an RV so don't need one. -
A
So the MTVR adventure begins
Had sons birthday party today so didn't have much free time, but I did connect the computer. Saw a lot of codes due to weak batteries, after charging them up most cleared. So far I can talk with CTIS, ECM (copied my config), transmission. I need to see if I can find some software to talk to the... -
A
So the MTVR adventure begins
This one, at least for now, I plan on building from scratch. I want cabover and expandable sides. You're correct a shipping container would be too high, it also has more headroom than needed (and I'm 6'4"). -
A
So the MTVR adventure begins
You should see my thoughts on a mme truck "ready for work or play". This thing is inanimate so it's feelings won't be hurt :) just areas for improvement! 😀 I'm slightly more gental correcting my kids....slightly. -
A
So the MTVR adventure begins
Well tonight my govplanet truck arrived! Came from Georgia and arrived in WI today. Drop off went okay, since it is way colder here (17f) I was a little worried. I tried to install an ether bottle but there were these two hoses in the way and one shattered when trying to move it (what is that... -
A
LMTV Frame twist
When I mounted my habitat (20ft long shipping container) I built the interface to be able to use springs or not. First I tried without springs and when twisting up on a ramp there was way too much stress and it started to bend the bottom of the container. I then install the springs and now they... -
A
Question about hub bolt?
Probably won't find a torque spec for this particular as the manuals aren't available unless a Marine wants to chime in. It's likely a class 10.9 socket head cap screw, and if you can determine the thread diameter and pitch it's easy to find an approximate torque spec. Screws often have the... -
A
Have an FMTV, how is the MTVR in comparison?
Got a few pictures texted this morning, ETA in 2-3 days! -
A
Have an FMTV, how is the MTVR in comparison?
Update, got my EUC and have arranged shipping. 11370136 Sale: 10/16/24 Submitted to govplanet 10/17 Review 10/21 Submitted to TSC 11/14 Approved: 12/9/24 -
A
Question about hub bolt?
Almost looks like they may have friction welded together a little bit.