Search results

You looking for the same batteries or civi replacements? Try this thread. https://www.steelsoldiers.com/showthread.php?72577-M35A2-batteries&highlight=battery

Good Morning, The wiring diagram is in tm9-2320-24-1-2 on page 750. Looks like wire #2 and 770n needs to be connected to the alternator output. Wire 770p needs to get connected to the ground wire already there. Cap wire 568. I have not done a 1 wire conversion on mine but this looks like what...

The shocks I posted are for the A3 series that comes with the 395's. They are designed for the larger tire and extra weight.

Are you running super singles? If you are then you should use this shock.

Welcome

I just got a cheap led light from Amazonian and mounted that on the driver side in the back above the tag. Works great and lights up EVERYTHING behind you. It was rated for 10 to 36 volts I think so no inverter needed.

The good news is that the front axle ENGAGES and it was an easy fix.

Keep in mind that the size of the air hose (line) supplying the impact is just as important as having a big enough compressor and tank. I have a 1/2 inch line that I use on my 3/4" gun.

I used an aero turbine (jones turbine). I welded some stainless V-band flanges to it ad fit just like the original on my A3 but I am sure it would work fine for an A2.

I put dielectric grease in all of mine when I put them back together.

Did you check the fuel shut off solenoid and switch? How old is the diesel in the tank? Is there any algae in the tank? Does it run with fresh fuel connected directly to the pump inlet?

I would just like to take a second and say thanks to EVERYONE looking into this issue. There seems to be friction between two people but their goal is the same. They are trying to keep everyone informed about the proper parts and equipment to use on our trucks and why to use them to keep us...

Would this work? FFT-180X10B - Fuel Tube, 180 x 10mm (5.91 x 0.31"), Black ... FEATURES: Made of high-tech plastic Superior to all types of natural and synthetic rubber hoses (including SAE 30R7/9/10) Highly resistant to solvents / chemicals in modern pump...

Been over a year and still no comments.

I run lockers in my pickup but would only lock the right front hub in ( dana 60 front and 14 bolt corp rear). That keeps it as an open diff with only the right front wheel pulling. I hardly ever needed to lock the left front unless I got in REALLY deep mud, but I would usually know I was going...

I was suggesting to look at the oil cooler because if it was removed you would have more oil in the pan.

Just a quick thought. Do you still have an oil cooler or did someone remove it? To tack on to Frank8003's question How long did you let it drain and was it at operating temp?

My garage has floor radiant heat is insulated and is 1200 square ft. My house is just over 3100 sq ft and was build in 1937. I am not ripping all the plaster lattice walls out and adding insulation there. Insulation is where it can be added without a major renovation. Windows are all high...

Yes. I have a title II power generating certificate for my system approved by the power company and the state.