Search results

I am here! I have had a site crash and my email is not working, try my alternate email addy avengeusa@yahoo.com, i am going to change my email in my profile so it is easier to get in touch with me..... still working on the site, server, and all that stuff

I have been out for a few days, making other things, shop busy...... I have been working on plates also...... the plate/offset is not an issue, deep dish out for the rears, and dish in for the fronts, i am looking at a way to make a plate more affordable to manufacture, the centers can be cut...

nice

i cnc machined the centers out of the wheels, and made new centers for them, bolt/weld in i have wheels if ya need em, cheap

I would get a set of hemtt wheels, modded and some 395 tires the wheels can be had for cheap, the mods can be done pretty cheap i have seen tires from 100-150 dollars

i did the same thing but hid it under the heat shield on the pass side, i have pics of it in my album, go look at them, makes a bit of a difference, and is a cheap easy mod no egt's yet

the same

someones modded truck...... my take on it...

Michelin 325/85-r16 XMLs 70% - 90% tread 38" tall by 13" wide $500 for a set of 4 heres his site 100Dollarman - Tires!

100 dollar man has those, he is a member here and his site is very similar to his name

OK, here you go, number one, do not rely on the gage, it may be off.... use a volt meter and measure battery voltage across bot batteries while the engine is running it should read substantially more than 24 volts, 26.5-28 or so If not you need to check the wires on the alternator, the large...

I am planning on a weld also..... I was not sure if i wanted them all set up like the front, as in flipping the hubs, or if i wanted to leave the hubs and run them as is, the bolt in deal is to make it easy for the do it yourselfers.....

lemme know, i need at least one, maybee 2.....

the centers are bolt in using the outside bolt holes that hold the wheel together, aka 3 part wheel, once bolted they can also be welded for extra strength.... the plates center the wheel, this is why they are not simply laser cut, they are cnc machined so the holes line up correctly, with...

those centers could easily be cut out again......

well if anyone has a couple that run, and have brakes, lemme know, i had no chance to bid on them....and need at least one, maybe two

here is one of the wheels painted

the offset is fine, should be no rubbing, have not mounted them yet, but the backspacing appears to be perfect for the deuce they could be mounted with flipped hubs, or non flipped....

I have modified my own with hemtt wheels, it is easy to get at the lugs, those wheels look like it may be harder to reach them...... here is a pic of mine....