Search results

Chain through steering wheel, keyed door locks, hidden cutoff are also good options.

Self fusing tape tends to not be that tough, with constant pressure it will creep and allow contact (at least the versions I've used).

Lots of full throttle for sure.

No clue! Put on the eco hubs very early

MPG report 30400 lb weight Eco hubs 6x6 m1096 (lwb chassis truck) 2007 C7 188 miles driven 30.3 gallons Highway speed was 65, that was for about 90 of the miles, rest were 30-55 backroads. Elevation along route: = 6.2 MPG

MPG report 30400 lb weight Eco hubs 6x6 m1096 (lwb chassis truck) 2007 C7 188 miles driven 30.3 gallons Highway speed was 65, that was for about 90 of the miles, rest were 30-55 backroads. Elevation along route: = 6.2 MPG

This is what I am referring to, but haven't looked into the details too much. I tried another GFCI on the pedestal with same results. Sometimes charges for and hour, of sometimes trips in a couple minutes.

Currently out at a frozen lake about 2 hours from home. Absolutely gorgeous and having a wonderful time with the family. Tried using shore power but their GFCI keeps tripping, I think it's because of the various inductive loads from the autotransformer and inverter. There are different GFCI trip...

If you are taking the wheels off, how do you plan on getting them in the bed? From what I've heard, yards can be very different, some allow you to work on the truck and some want you out of there immediately.

Reworked the chassis and cab grounds, that one to the cab was atrocious - paint and the toothed washed wasn't even compressed against the two surfaces. Used a flap wheel and carbon conductive grease for the various connections. Christmas is coming so threw on some lights. Also put some on the...

Well looks like the fmtv mount won't fit without a little grinding. 0.02" too narrow. Edit: saw the dimension correction above. Looks like it will fit for moving around slow, but not enough room to put in a sleeve. MTVR on the left, FMTV adapter on right Connected: E

No clue!

What prevents this kind of setup from having excess rain fill up the exhaust/turbo/cylinders? Obviously the slash cut outlet helps some.

Awesome, thanks I'll check if it will fit and post up. Yeah fmtv 1.0" compared to mtvr 1.5". That said the FMTV is still rated 65,000 lb WLL

Wondering if my FMTV tow feet will work with some sleeves (1.0") to be able to move the MTVR around. Could someone please take these two measurements?

I did, but there just wasn't enough room to fab the structure needed for those ISO mounts - I wanted to keep the box as low as possible and with the battery box and fuel tank locations it just wouldn't work. Having compliance between the box and frame was very important and if using the ISO...

I may do this as we plan to go out quite a bit in the cold. Looks like a simple install.

My truck was also MME, and my breaker was also pulled. After various diagnosing and trying to talk to the ABS computer (with some strange results, I think it wasn't quite dead) I took the thing apart and found water intrusion. Trying to find another one was a little tricky, I bought a...

11370136 Sale: 10/16/24 Submitted to govplanet 10/17 Review 10/21 Submitted to TSC 11/14 Looks like we bought ours at a good time, no more MTVRs (or even FMTVs) listed on govplanet.

I just had to replace my boost pressure sensor. Over $200 and a real pain to get to. Was happy with the straight thread/o-ring seal though. On a C7.