• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    MEP-803 fuel pump Length discrepancy

    Somebody was messing with the fuel pumps, looks like 1 and 2 had shims added. I went and pulled the injectors and took them apart. 3 out of 4 were pretty rusty inside. Getting to the point where I’m just gonna junk this whole damn thing, who knows what else is wrong with it. so much for the...
  2. S

    MEP-803 fuel pump Length discrepancy

    yes I did, it compresses by hand and fuel comes out. Looking at it more, it seems like there’s too many shims for this pump. I’m gonna take #1 pump off tomorrow and measure those shims. what’s The best way to get the pin aligned on the pump with the fuel rack when putting it back in ? I’m...
  3. S

    MEP-803 fuel pump Length discrepancy

    Hey guys pump number 2 won’t produce any fuel while cranking with the line off. Looking through the engine tm, on 3-23, it says to shim the pump. Never done this before, anybody have any experience with this procedure ? Thanks for any help in advance
  4. S

    MEP 831-A K1 relay won’t engage

    No never seen it work like it should. With a bunch of the cable ties cut, it makes me think that somebody was in here trying to fix it before but gave up.
  5. S

    MEP 831-A K1 relay won’t engage

    Thanks to kloppk, problems been solved. Ended up being a reverse wire on the battle short switch. Flipped both around and K1 works like it should. The S7- 5 and 8 contacts were backwards. Thanks again to kloppk. Guy knows his stuff.
  6. S

    MEP 831-A K1 relay won’t engage

    Also Does the S5 switch close a ground ?
  7. S

    MEP 831-A K1 relay won’t engage

    Hey guys, got a 831-a, and having a problem with the a/c contractor (k1). My problem is basically the switch on the front (S5) won’t engage the relay (k1). I know k1 is good, I pulled it out and energized it with 24 and the relay clicks and has continuity. I pulled out S5 too, tested ok. If I...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks