Search results

I'm in the middle of reworking my M151A1, It to had a random miss. Nothing too much to worry about. It too had a small exhaust leak. When I get to the motor I was going to add the gasket, It is metal against metal fit. A gasket would sound like a good thing.

The M151 had drain plugs in the front pan area the M151A1 has recessed cut outs. These drain plugs are not the easiest to find, if yours is missing.

I've been a MVPA member for a long time. Relocated to NE PA a few years back and found that there aren't that many MV collectors close by, Like there was in SE PA. Joined up with SS a little while ago, Read a lot of the post, found some great info, added to a few post, got a reply or two. was...

I had a rebuild kit that I had picked up at a MV meet, After several attempts I was looking at picking up a kit from or have Then and Now do the rebuild. Then I made the stand for testing the pump,Again after pulling what little hair I have left out I finally got it back together correctly. When...

I'll go along with the diaphragm stems being a PIA. I had the levers and stems all jazzed up,just about ready to toss the whole setup, and go with the electric pump. I also looked into Then and Now, didn't go that route. Got the pump all together and working. I built a stand to mount the pump...

When removing parts from my M37, I found the original color under the blackout light. that didn't see day light for almost 53 years. That was 24087. I still have to put another coat of paint on when the time weather lets me.

Working on some interior items. bolted in the gun rack, working on the doors. Just like others wait for the money to show up to complete other projects.

Yes,Please post pictures. I have a M151A1,I use the one window for travel and put the two window for shows. Don't want to wear out the two window top.

You were picking up at a GL site, and so was this guy. Should he be picking up anything at a GL site? Was this guy legal? What is the end use of the items the non english guy was picking up?

If you're looking into the dump option then use the thread previously mentioned. If you want to plug your military trailer into your civi pickup truck, I wouldn't use that thread. You have good packard electrical fittings why not use them? That thread shows after market wires plugged into the...

One thing to remember is that the part that has the electricity waiting to be used is the female end. You don't want exposed live parts. Is your trailer relamped to 12v bulbs? Take a military trailer receptacle with leads that would be about 6 in. long, pick up a trailer plug( from Napa or some...

I'll have to look , I may have the lower grill. As you see in pic 7, 8, 9 from jollroger the lower grill is just about 5/8" from the frame. Let me know if you need it.

If you could pickup TM 9-2330-212-20, and check out Pg. 2-28 and 2-29 they cover timing and show the adapter previously mention in another reply. As for the screws I'll let that one alone, what I did may not work for you or be the proper method. May be some one else is more informed.

As previously mentioned, You could spend a lot of money to have a good running truck. I know what I have in my M37, and I didn't go completely nuts reworking every little thing. Offer what you think is a fair price, work from there.

It looks like part of one seat is there, is the driver's seat around? Different size tires or types. Like what was said earlier, about $1000.

My M37 is from the 28th Infantry. The front bumper markings were painted over several times,along with unit marking changes making it hard to figure out. I found 28-28 128 ? I think Or it has 28-2 delta 104, 28-2 delta 104, 28-28104. That's on the left side, I have on the right side B9 , B 18...

I have a few hope this helps. not super detailed, but good to review. Ed

Looks great! To get my M37 out of the garage I can't have any canvas on it. I just sneak by with about an inch between the garage door and the windshield. The back bow has to come off to fit under.

If your previous owners were real nice, they may have even tossed out the spacer. If you could get a look at TM 9-8030, check out page 250 Fig. 130. That will give you all the info you need. If the spacer is missing, looking at the TM you can see that it is wedge shaped. The cowl side panel...

That would depend on what your version of real nice shape is . Look and compare the shape and price on Ebay or other listing service to what yours is like. Then price accordingly.