Search results

You sold it too cheap . $3500 would have been a good deal .

You can ask what you want , you can sell it for whatever someone will give you for it . No winch and the buyer can look at and drive it $6000 - 6500 . The winch trucks at Sparta last week closed at around $5500 . My winch truck at Sparta last year I paid $7700. :(:(:(. I don't think I will make...

guys that are not familar with the A2 love the looks of my A3 . I guess they just don't know better .

donor cab

depends what part of the country you buy from . A3 no winch as low as $ 3500 - 6500 A W/W $5900 - 8500 From an individual as much as u are willing to pay . watch ebay and see what they are selling for ( not what they are asking ) . That will give you a good idea what to pay from an...

I have new tires for mine I will need 6 o rings when I install them . PM me with payment options . Thanks, Joe

I have the same problem on one of my mep-003 gens. Only the AC volt meter ha the problem .

Don't know why I did not think of that !! These lock nuts are the stamped style I think that would work but I wouldn't want to be the guy holding the wrench . I will mount up one on the outside and put on the truck and see if I like the way the tire sits under the truck . From looking at the A3...

Looks like I will be putting the plate on the outside . The holes in the adapter plates are to big for the studs to stick . The nuts are lock nuts , so The stud would just spin in the plate and would not tighten up . Oh well, just saved me some time . I think once I get all the studs and nuts on...

Knocking the studs out was my main concern . I just went out in the garage and gave one 2-3 mild taps with a 3 pound dead blow hammer and it flew right out . If the other 95 studs come out as easy I think I will put them on the inside . I thought they would ome out much harder then they did ...

I am putting some hemmit rims with adapter plates and 395's on my A3 . My qeustion is what is the best place for the adapter plates ? On the inside of the rim or the outside . I think they would look better on the inside , but I am wondering if it is worth nocking out all the bolts to put the...

I had the same problem with Eric and others . They said they could do it , but when the EUC cleared I had a hard time finding someone to haul my two trucks .

I was qouted $70 a gal for type two waterborne and $120 for a gal of the hardener . I think it is two to one so hardener would do two gallons of paint . So you would have 3 gallons ready to spray ( more if you thinned it with the sugested water ) at $86 a gallong .

Primer is for bare metal and filler/ bondo . clean it with degreaser and paint it .

The older A3's have green cats , the newer ones are yellow . Why ?? I don't know . The yellow engines are in the high # serial # trucks .

Not sure what I will bring , depends on the weather and how much time I have to spend down there .

with taller tires no need for different gears .

Mine was missing a counterweight in the rear and had the shake , it got better after I added the counterweight but still has some shimmy at the 48 - 50 mph range . If I take it to 55 it smooths out but then I am turning the engine a little fast . I have a set of hemmit rims and 395 tires that I...

That was scary close . You can tell by the way they broke away that the pilots were concerned about saving their butts and **** with the routine . The heat also may have affected the prformance of the aircraft making the loop on the down side a little larger than intended .

just one door is about my max lifting weight . I would geuss a door with glass at 80 pounds . I put a door on a scale and came up with about 73 pounds . I have a bare cab but no way to weigh it . It was put ona trailer with a tractor,taken off trailer with bobcat .