• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. baxter

    Head gasket,what else to check?

    I just finished doing my head gaskets (continental ) as well I didnt do the studs I felt they were fine.I would say know is a great time to do a block heater with the coolant out.just my2cents. Vaughn
  2. baxter

    photos of my truck

    First thing I did was to disconnect the battery then removed the air filter assembly so that I can sit their and work on it. drain the coolant on the passenger side toward the back of the motor thier is a drain I used a piece of garden hose to get it into a bucket. Then you can remove the intake...
  3. baxter

    photos of my truck

    I got the cover from Big Casey here on SS for $300. I already had the bows.
  4. baxter

    photos of my truck

    Kieth J yes you are correct. I just had to do a little math to recalculate for the added length.
  5. baxter

    more snow play

    Great pics, after I get my new tires I'd love to get more snow and go play.
  6. baxter

    photos of my truck

    It is a great place to work on a truck. We manufacture silencers, the shop is 34000 Ft and has air drops all over very handy. One thing I found out was you can use a snap on 7/8 carbon monoxide socket on the drivers side head bolts to torque them down and not remove the oil cooler( I didnt have...
  7. baxter

    photos of my truck

    I have been working on the truck the last few weeks (blown head gasket). I have really learned alot about my truck. I got this cargo cover and had to snap a few pics. I will be recieving come 395's in the next few weeks I cant wait to get them mounted and get a few pics of the new rubber. Vaughn
  8. baxter

    LDT 465 cyl.head torque sequence, rod torque

    If you dont have the newer head gaskets I recomend you contact m35tom. They also come with torque steps and the order to tighten them. I am just finishing mine. Vaughn
  9. baxter

    repairing rubberized cargo cover

    I was thinking maybe like a tire it sounds like that is the way I will go with it thanks for the ideas. Vaughn
  10. baxter

    repairing rubberized cargo cover

    I just got a ruberized 3 color cargo cover (thanks Casey) it has a couple very small holes in it, does anyone know the best way to repair these covers. Vaughn
  11. baxter

    Making a Deuce a (better) highway vehicle?

    If turning up your fuel I highly suggest a pyro so you know where you are at on the EGT's good luck. Vaughn
  12. baxter

    1st Deuce Project Begins

    great looking truck I cant wait to see it as it progresses. Vaughn
  13. baxter

    more room behind wheel m35a2 help?

    You could install power steering and get a smaller wheel .
  14. baxter

    M35a2 block heater

    I installed a kats 2" block heater in my m35 just make sure the wings on the back are working properly before you install. Mine felt tight and was torqued to specs I then wormed up the truck no leaks. I was about a mile down the road at about 10:30 pm and I could smell antifreeze the heater had...
  15. baxter

    Fuel Compensator & Tuning Questions

    Great info thanks Chuck. Vaughn
  16. baxter

    Lower Radiator Hose

    Thier is nothing easy about changing the lower hose it I did mine last winter because it was leeking I should have waited till summer you just have to keep working at it. Vaughn
  17. baxter

    Fuel Compensator & Tuning Questions

    Chuck if I may, what i think you are saying is that the fdc has nothing to do with the ability of the motor to burn various fuels it just regulates how much of a specific fuel is alowed to be burned at a time. I hope this makes sense. Vaughn
  18. baxter

    11x20 VS 395 offroad performance

    Not to get off subject but I have some 395's comming and will use my stock rims what is the best size tube I should use and do I use stock flaps. Thanks guys and this is a great thread for those of us deciding what tireews to go with. Vaughn
  19. baxter

    14.00 on stock rims?

    Anybody know where I can get some 14.00 tubes for a decent price. Thanks Vaughn
  20. baxter

    Can you spot the A3 on 395s in this pic???

    Case I dont know if I asked while we were on the phone but did you flip your hubs. Vaughn
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks