• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. EO2NMCB

    Push button light switch

    RE: Re: RE: Push button light switch Last time we had m923s I think that is what they were{out of the motor pool}, all had the push button switch. What a pain in the a@% in the dark, using a cig lighter to see what button to use. The 3-lever switch can be turned on in the dark with your eyes...
  2. EO2NMCB

    New Deuce is a Blast to drive

    Just thinking out loud, did you drive the truck home with the placecards on the truck? Its a good sized fine if you are running empty with hazmat placecards on.
  3. EO2NMCB

    LDS-465-1A Exhaust Gas Temp Concerns

    OTR trucks will push 1200-1300 temps on long pulls. At 600 you shpuld be fine.
  4. EO2NMCB

    Looking for some history

    Being that your were navy and that the truck is solid 383 green, you could always make it a seabee or ibu truck!
  5. EO2NMCB

    lucky me

    Great buy, also nice that it has the heater!
  6. EO2NMCB

    M35A1 or A2?

    Thanks, well the army would have swaped the data plates as we bought it from drmo. But in reading some of the old post one from 2006 you had asked about 0125 trucks with a NKOXXXXX registration number would this be of those trucks? thanks again
  7. EO2NMCB

    M35A1 or A2?

    Here is the vin off the frame rail. 0125 19034 Thanks again charlie
  8. EO2NMCB

    Barstow Ca.

    You would need some type of trip permit to be legal along with Ins. Speaking as an OTR driver I would run I40 E to needles ca down us 95 to I 10 its longer that way, but not as bad of grades. Short route would be to run us 93 out of kingman to phx. then across. If you have never driven a...
  9. EO2NMCB

    M35A1 or A2?

    The vin is off the data plate. I'm out here on the road, so when I get home for xmas I'll see if I can find it on the frame rail. thanks again charlie
  10. EO2NMCB

    M35A1 or A2?

    Thanks so very much Medlog & DDoyle!!!! Since its a 72 model and has the exhaust running under the bed, could it have been wreaked some time while in the IL guard and been repaired with early parts?
  11. EO2NMCB

    M35A1 or A2?

    RE: Re: RE: M35A1 or A2? Thanks for all the help, forgot to state its a AM Gen...vin NK04JR054011365. thanks again charlie
  12. EO2NMCB

    Fuel in the Oil

    Not sure on a M/F eng, but most diesels if you are getting fuel in the oil its most likely a injector or cracked injector cup.
  13. EO2NMCB

    cross country tool and sprae part list

    Just speaking as a trucker, Alcohol for the air lines, a way to drop the volts down to 12v to run a cb radio to check weather ahead. Also by law you have to carry chains in the winter months in the western states.
  14. EO2NMCB

    M35A1 or A2?

    Well never thought about it before, but after reading many post is my truck a A1 or A2? The reason I ask is that the truck has no stack, it has the hoz exhaust that runs under the bed. Dad bought it from DRMO in 2000, Data plates state M35A2C WO/W , it does have the drop sides. Built under a...
  15. EO2NMCB

    BEST ENGINE FOR THE Deuce

    Just joined, great site. I could be wrong but I think that alot of folks like the MF because its a change of pace from there cars or p/u's that are gas. I on the other Love a big cid truck gas eng for the sound, since I drive a 3406E cat for weeks at a time. As for a turned up MF passing OTR...
Top