Search results

I just happened to notice the larger footman loops in the 373 trailer were the same as on the M37 soft top cross bar. Looks like the smaller ones are 1 1/4" and the ones for the cross bar come in close to 2". They were rose budded to the cross bar on mine. I had one missing and I measured ten...

I bought a 24 volt remote starter switch for if and when the PCB goes south . Kept it in the truck when out and about or tool box when working around the yard. I only had the Cummins 250 and would use the thumb screw and remote when I had a no start with cab controls. From reading threads the...

Have to agree Mag drill and the annular bit for the perfect drilled hole. 5 ton frame even worse to drill through glad I had the Mag and annular bits.

Got two of the night vision goggle cases and got around to putting in the foam. Works great so thanks again Dawn.

Rut Ro.

Control knobs not in correct position? I put all of them on where they are supposed to be not half way in between even if the function is not the one I need.

I am changing to clean sheets on your bed. Cleaning the bathroom ( not that it needs it ) Making sure there is coffee for the coffee machine and vacuum the house ( not that it needs it ) well maybe just a little extra sand on the hard wood floors. Looking for worms incase you want to go fishing...

Never thought about it till now. Mine up.

3/4'' key. Yea he spelled bold and he was thinking bolt. Happens to me all the time. Also I keep my cage bolts in the truck as they can rust sometimes and be non useable. Oil the threads before use is a good idea as said above to not over torque. When the nut feels like it is getting tight that...

But you have never gotten a whiff of my 7-11 burrito out gassing. You would climb over Mount Everest to get away from it! On a side note you do remember that is just my storage trailer and it was easer to put it there for now out of my way.

:cool: Yes I fixed the horn that now goes beep beep. Also member Mullaney is the new owner as soon as he gets down to Sunny Fl. to pick it up.

Was thinking about the placement of the John and this might be the best place. Here I can air out the 7-11 burritos without gassing out any one still in the trailer. Yes / No?

From a couple of my recoveries I have learned that a credit card with low balance and high credit limit comes in handy. " Have check book will travel". Also a no time limit on my Donkey helps. Yep I hate DC / beltway Northern Va. too.

Yep welcome from Interlachen. Most definitely TM's is are friend but there are some thing you need to check before you drive it to far. There are threads about some things we need to jump on first. Hubs set up / oil plus drive line balance / out of phase. Some brackets that needs to be checked...

Just for reference.

My eyes a going bad and enlarging your pic I see the O rings and the damaged one. Like the blind man that picked up the hammer and saw.

Yea the metal goes the other way when we have cork top filter. On the canister center post almost at the bottom of the shaft is a hole. There is a carter key the goes in it to stop the first washer. Then spring then washer then fiber washer then metal thingy dish up to cut into cork. Then metal...

Thanks really I think it was 3 am and could not sleep. Yea I am better after 12 am and the coffee has kicked in. Just to add I could not do it but yea PSI can be converted to Nm. from what I read. Side note I miss the young mans sleep habits. Last two years best I can do is maybe 5 hours at...

Been maybe 6 months since I moved the trailer so I thought about the bearings and oil in my hubs. Took longer to get out the air compressor, air jack and wrench to cage the cans. Quick jack up, cage one side give the tires a good spin and on too the the other side. Put stuff away and same as...

Yea happens when ever I get the good stuff. Glad I got my medical card, say what little monkey PSI = puffs per square intake. Yea did not want to confuse anybody so not only "lbs" but foot pounds not inch "lbs''. I corrected my no thought thought post.