Search results

Bought it!

Yep! I'm good for the next 4. [thumbzup] Great site to be a part of. Thanks admin. and mods for all the work, may your vehicles run well.

FWIW. If you can remove most of the crud at the bottom and the dirty brake fluid from your MC before you start adding new fluid you'll need to purge less. A basting syringe from a dollar store worked well for me.

For the gear only, try this part number: GM 1362195. Fleabay has them for $15, YMMV.

Another option for your alternator needs is member Tow4. He sells rebuild kits and may be able to find a rotor, may be worth a PM. Here is a link to his ad in the classifieds: http://www.steelsoldiers.com/showthread.php?146702-Delco-Alternator-Rebuild-kits-for-alternator-p-n-1105500

According to the TM-10 a stock M1009 is rated for towing 1200 lbs with 100 lbs tongue weight. As mentioned before, upgrading your receiver hitch will allow you to tow more weight safely.

For entertainment purposes I'll share some highlights of my '09s work log. Exterior Behr Marquee, front cab DIY bed liner, cargo area Rustoluem rattle can. There is phrase which is repeated in the CUCV forum: "If it's electrical clean it, if it's rubber replace it". So... cleaned the...

Agreed Robo McDuff, so here it is: One reason I like my truck... It gave me an excuse to learn how to weld. The truck had a lot of rot when I purchased it. I started on the passenger side and then moved over to the driver’s side, I could tell there was some improvement in my abilities...

This is on adorning a bulldozer here at work.

Not in it to win it, heck I encourage you to vote for somebody else, I did [thumbzup]. But, I've been a member for 2 years and have not participated in a MV of the month so here's my rig. Picture from the recovery mission, purchased in North Carolina with the intention of converting to a...

Another welcome from MD.

Glad the recovery went well for you, it looks like a great truck to begin with. Enjoy!

With all due respect to the all of the great entries this month, TWM's MB Jeep will get my vote, awesomeness. I will offer up my '09 as cannon fodder, picture is reminiscent of cooler days.

Welcome from MD. Good luck on your recovery drive.

Already answered.... https://www.youtube.com/watch?v=BPWcV9KMIEU

Is this similar to what your looking for? More of a selection here: http://www.clipsandfasteners.com/General_Motors_Clips_And_Fasteners_s/64.htm

For me, the two piece vent seal from 1aauto fit well on the passenger side. It opens and closes fine. Didn't need the drivers side. X2 on the great looking M1007, great work.

Here's a recent thread on the subject. http://www.steelsoldiers.com/showthread.php?156233-Which-Brand-of-Door-Glass-Weatherstrip-and-Seals FWIW seals from 1aauto, were made by Precision.

Welcome from across the Chesapeake Bay.

Welcome from MD.