Search results

You can run the 14.00's as a single (with the right rims) but if you dual them up you will be over width. it's dark now ,I will try to get some pic's tomorrow of my bridge truck from the rear.with an 8' bed your tires will stick out about 7" beyond the bed.great for awesome rooster tails.

Do you plan on driving this truck on city streets? yes, you need the spacers to clear the spring pack and front steering components.you will be about 9'-3" wide,how wide is your bed? I think super singles would be your best bet.

RE: Pionier trailer Maddawg,any idea what he want's for a deuce from the back 40?

I wonder if you have a sticking proportioning valve? Ron also has a good point on the rubber lines,are they original?

At $300 a tire I am not willing to risk shredding a tire on your doubts.but you are right they do look kool ,but there is a differance between looking kool and getting the job done.

i tink it is ha goood ida too hav thanx ih can us it! never much cared for english litt.

You might want to further investigate those 1600x20 tires.I have talked to several reliable sources that have told me the 1600x20 on a stock axle spread will only leave you about four inches between the two rear tires.just enough for a small rock ,stump or any other debri to get loged in there.I...

Anyone have any input on these tires,good bad ? might look to pick some up for my truck.

Can anyone tell me what the tread depth of a new michilen 1400x20 xl is?

Is there a finders fee?

Maple flooring? must be a pretty nice school.all we had was the old asbestos tiles(cough cough) say what type of rims and tires are those,cement truck?or are they millitary supre singles

RE: Oil and fuel filters Call Memphis Equipment,they have a filter kit including oil,air and fuel filter.I think it was $125. also dont forget to check the inlet strainer in the injection pump.it is under the large flat head screwdriver slot at the top rear of your injection pump.make shure it...

RE: Re: RE: Transport Two Deuce Engines from Columbus OH to If I can help out let me know,I have a trailer good for 5000# it could haul your engines or ida's 1009.don't think the old farm ford is up to the task though,I could ride along and poke ya with a stick to make shure you don't fall asleep!

Look at the bright side, you probably saved them hunderds of dollars on there roof,since those furnace vent pipes were not flashed right it would have rotted out the sheeting and soffit.and not to mention how much they will save on there electric bill upgrading to 13 seer ac units!!glad to hear...

Better?

Is there any way that I can run my stock 14x20 as a single on the rear of my bridge truck ? or are my only options super singles or12x20 duals?

My new rig( M812)runs 60 psi @idle and around 90psi @ high idle @ 190 deg.the gauge sets at about 5# when truck is off. a little off subject (and hate to ask out of my own stupidity)but where does the fuel go from the primer line that connects to the engine pre heater?

Is there anyway to quiet that buzzer?I cringe everytime I hit the master switch!(kinda like the first time I shot the 7 mag!)

How long does the air pressure in a five ton last on average?every time I get in it it's nearly at 0(over night) cant hear any leaks.is this normal or do I need to dig in further? getting tired of that loud a## buzzer!

Thanks,Kenneth So if I understand you right the fenders and side covers wont work.