Search results

Here is my M1009 ready for the Fourth Rich

I have a dumb question that I cant seem to find the answer to. When I put the ignition switch to the on position is the temp light supposed to come on? Looking at the wiring diagram I don't see how it would as there is no logic circuitry to turn it on when the key is on but not running. It...

So here it the story. I installed a new aluminum radiator and heater core yesterday, and all was well, then I checked the coolant to negative terminal to be sure I didn't have ground issues, and i got almost one full volt! Not good at all. The weird thing is as the coolant cooled the...

I recently came across 8 NOS injectors, problem is 6 are Delphi and 2 are Bosh. Part numbers/NIIN's cross. Do I need to have them matched or can I just install them? I am going to start running a 50/50 mix of UMO and diesel and want a spare set to swap in when I get the coking build up.

I know no one wants to read another broken starter bolt thread but I have one that 2 days’ worth of searching has not answered. While doing routine inspection the other day I discovered a missing starter bolt, looked up on the block and the bolt from the support bracket to the block was gone as...

I know there has bee a rash of alternator posts lately, but none of them or the ones that I got on the search have been able to answer my question so here goes. My voltmeter is reading right on the line between green and red, showing near an over charge condition. I pulled the battery cables...

I just wanted to take a minute and thank you all for the help and advice I have gotten the past month. I have owned my 1009 for a month now. This place has helped me tremendously. I am an Aircraft electrician by trade, but Doghead and his ability to teach have helped me tremendously in...

I had not read as much as I should have and topped off my master cylinder with dot3. I have read about 20 threads now about which is better, and not to mix them. However I cant find what to do now. I am planning on just sucking out all the fluid from the reservoir, and filling with dot5 then...

Proud new owner of an 85 M1009. Looking forward to getting smart!