Search results

I have an AC question. My M1152A1 (2 man) has the AC condenser on the right rear fender and was wondering what it goes to. My assumption is that the compressor is driven by the serpentine belt then is condensed on the radiator under the hood. Is the fender condenser used for addition cooling...

Notice a data plate on one of my geared hubs. Does this mean that they were serviced at the same time or something along those lines?

I have an m1152A1. I’m looking to put a 4 man hard top onto it and some x doors. Need to put the kids in the back. I was thinking of getting TheHummerSupply fiberglass hardtop that is the 1165A1 look $3500 (local pickup only). And was looking for some hard doors. They don’t need to be...

The person wants 4500 for the set.

Anyone know what a fair price is for a set of 4 up-armored doors with 5/8 glass would be. Found a set. Picture attached.

Any pictures

I have been trying to find the plastic bracket that secures my temp gauge to the instrument panel. I had bought one but it wasn’t the right size. Apparently there are different sizes. The one I need goes with the temp gauge with led over heat indicator. If these aren't sold as a separate piece...

Update, bought the KDS yellow label. My wait light/glow plugs were acting weird. The wait light would come on for 1 second then go out. This would happen even cold. I could tell the glow plugs were not heating up. Put the new TSU in and back to normal with the wait light and glow plugs coming on.

Perfect! I cleaned some of the grounding point up, but I think I’m missing some. I cleaned the one for the alternator, the one next to fuel filter, battery area, and some of the gauges.

Sorry 8 or 6 gauge wire

Has anyone made their own grounding harness? From what I have read the grounding point for the turbo version of the grounding is diffrent? Looking to make my own but I don’t know where to ground it and the lug size. Was thinking of using 16 guage wire. Directions would be great!!!

I saw that stuff at tractor supply the other day 👀

Anyone ever use this Eastwood 2K Ceramic Chassis Black Satin ?

Looking to paint the frame on my truck. There are some small spots of rust and looking to freshen up the whole thing. Any suggestions? Looking for a matte/satin finish. Any past experience?

I had the heat shield off not to long ago and was seeing if it would move. Now I know what direction it’s supposed to move I can determine if it’s working as it should. Thanks for the great info!!

I recently have been tinkering with my M1152A1 and noticed that the wastegate doesnt move. I have pulled on the little rod back and forth with a good amount of force and no movement. In addition, I don’t hear the thing whining or spooling, but it’s loud and possible can’t hear it. It doesn’t...

Any suggestions on how to get the extended version off? I loosen the Allen wrench screw and tried pulling…. They are stuck. Any suggestions?

For the check valve. I would be removing both the supply line and return line ones? Also what would I use to fill the void from which it came?

Engine oil and filter, transmission oil and filter, front diff oil, most of my time has been putting things back together and figuring out what is missing. Fuel system as aforementioned is next on the list.

I replaced all the glow plugs already. Still on the same diesel it came with haha. Probably been in there for 7 years. Read another post about draining any water built up in the filter area by opening up valve when at idle. Might try that with some fresh diesel. Any additive to run through it?