• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. T

    Official 2017 Ga. Military Vehicle Rally buy-sell-trade thread

    Hi Have 2 wreckers for sale , Too many Trucks , said my wife, 1- 936 fully serviced and with many tools 23,000 miles , Truck has had a complete service and has been updated $19.000 or best offer 1- 936A2 Truck has been given a complete service and updated Jan 2016 by the Army 8,200 miles...
  2. T

    5 ton horn wire short

    Has any one have a problem with the horn wire from the steering connection to the horn valve short out Thank you Tubamlb
  3. T

    M936 Wrecker Hydraulic Hoist Motor

    Hi Just 2 oil lines and 4 bolts It is heavy so get 4 hands on it MLB
  4. T

    M936 Wrecker Hydraulic Hoist Motor

    Hi Had a leaking boom Motor, 936, took it to a shop that replaced all o rings and seals , they said the motor had the wrong type of seal , Army rebuild Cost $160.00 , MLB
  5. T

    M936 Main Hydraulic Pump - commercial equivalent?

    Hi Found a very good Hyro repair shop in Fort Lauderdale Fl , They overhauled and sealed and my winch motor and presser tested it for $160.00 the problem was the Gov. overhaul when preformed most likely 3 years ago used the wrong type seals Could be why others are having fluid leaking...
  6. T

    wrecker winch motor seal

    Has any one replaced the seals in the hoist motor if so please give me some info Thank you Mike
  7. T

    939 EUC's ? Months after auction???

    Waiting from Feb 2 ,2017 for SR 97s Whats going on with Gov Planet tubamlb
  8. T

    AM General M934 How difficult is it to find repairs & how much will they set me back?

    Yes, If you have one of the Military truck repair shops do any work on your vehicle make sure you get a written estimate first then still check on what is done I have had some very bad over charges from these people You may PM if you want details of who to watch out for MLB
  9. T

    Fuel Gage M939 not reading

    I have a wrecker so there is not any space to pull the sending unit , that is why I asked if there was any other way to rep the floats
  10. T

    Fuel Gage M939 not reading

    Hi Were you able to change the float through the fuel opening or did you need to pull the tank Thank you
  11. T

    Fuel Gage M939 not reading

    Fuel Gage shows Emty , when I pull sending wire from transfer switch it shows Full ?
  12. T

    M939 Transfer case

    Hi the Transfer case is stuck in Low range any Ideas how to fix
  13. T

    WTT: 5 ton wrecker M543A2 + M35A2C + M105A2 for something super nice, Dallas, TX area

    Is the Wrecker still for sale , if so Price? Thank you Michael 954 610 6251
Top