Search results

I wired two into my m1009 awhile back. It involved using relays to cut the power to the gauges when the key was off. Juice for each came from each battery separately and used separate ground points as well. It's an old post, back in 09.

Oil and rubber works. My father, an old school mechanic, uses it to seat tire beads. I do also, works better than the store bought stuff. It also makes rolling the bead over the rim easier.

I'd take the engine, complete, with all the extra's still bolted on. Just gotta be in driving distance.

Anyone ever has a speedometer make a rattle noise? I've got a noise behind my cluster and can't track it down. I've pulled the gauges and secured wires and whatever else seemed like it might work.

M1008, 39,000 miles: Chassis saver paint on, under, beneath, between... Exhaust, Aluminum Radiator, heater hoses, solderd heater core inlet / outlet. headlight relays and terminals. Accessory fuse boxes. Air filter, PCV valve, fuel filter. Sealed w/ chassis saver and wrapped w/ roofing tape fuel...

M1008

Here are U-joint #'s Parts Plus: 1-0153: F.D. & R.D. @ T. & T.C. (x three) 2-OO53: F.D. & R.D. @ A. (x two) 3-0332: A.S. (L) & (R) (x two) F=FRONT R=REAR D=DRIVE SHAFT T.C.=TRANSFER CASE T=TRANSMISSION A.S.=AXLE SHAFT

Anyone have part numbers for all six u-joints?

Where can I find heavy wall, pre-bent exhaust manifold pipes for a 1008?

You know that camo pattern with the naked lady's like on the trucker mud flaps...

2 fuse boxes, attached to the removable plate beneath the steering wheel, one always hot, one switched via the blackout switch for always hot, and switch controlled. Cup holders in front of the 4x4 lever, a small box to hold assorted detritus next to the 4x4 lever, fire extinguisher behind the...

I've heard good and bad regarding the 700R4's. Never heard bad about regearing. Gears would run about $300.00 do it myself except for the carrier.

Looks like there are different "carriers" for different gears. The highway gears are for a different one?

Well I'm certainly not wanting 1009 axles:)

Any help in finding a set of more highway ratio gears for my M1008 would be greatly appreciated. Also, is the 14 bolt axle full or semi floating ie, does it have the "C" clip?

I doubt exhaust flow will gain you much. These 6.2's like 2.25 exhausts.

Put some grease in the ball joints as well.

Did some work on the 1008. Replaced the two blue fuseable links on the fire wall with self resetting breakers, both at the start of the leads. Put two of the same next to the junction on the firewall and used one to power two relays to the headlights and feed them better while taking some...

Gear ratios are like shotgun gauges, the larger numbers are smaller / lower / slower. 3.73 is faster with less torque. (highway gears) 4.56 is slower with more torque. (towing / hauling gears)

I do not know about gear ratios and axle gearing. I do know a 700R4, well built with a torque converter lock-up switch will give you better low gearing and overdrive as well. Add to that tall tires, like 255-85-16 and you should be there, or close. I also recall reading someone was putting...